Max 300mbps?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My internet just had an upgrade from 300/30 to 350/35 Mbps. If I connect directly to the modem router I get 350, but from the deco m9 plus i get still max 300 (cabled) I already rebooted it, but it still gives only 300... what can I do to get the max speed?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Increase QoS setting up to 500, it may still be set at 300 and this is what limits the speed. See Using QoS feature of Deco
- Copy Link
- Report Inappropriate Content
Welcome to the community.
May I know the model number of your modem router?
Have you tested the speed via Deco APP>More>test internet speed?
And when you tested the speed of M9, is M9 the only device that connected to ISP modem router?
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
My Modem is the standard Ziggo Connectbox.
First I tested with speedtest.net, but if I test via the deco it seems to be OK... What could cause the difference between the reported speed from deco and speedtest.net?
The Deco M9 is the only device hat is connected to the modem/router. From the deco I have a utp cable connected to a 1Gb switch and all cabled devices are connected to that switch...
Thanks!
- Copy Link
- Report Inappropriate Content
Increase QoS setting up to 500, it may still be set at 300 and this is what limits the speed. See Using QoS feature of Deco
- Copy Link
- Report Inappropriate Content
@Alexandre. That did the trick! thx!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 788
Replies: 4
Voters 0
No one has voted for it yet.