Archer AX73 disconnecting all devices from 2.4ghz
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi everyone. 3 days ago I bought new router to my home network. Router is connected via LAN to internet provider router (provider router has turn off wifi).
Both (2.4ghz and 5ghz) wireless turn on Archer AX73.
2.4ghz using about 8 devices (like smart plugs, online cameras, weather stations etc)
5ghz using about 5 devices (some TVs, Iphones, laptops)
and 2 devices connected via LAN.
Smart setting for wireless is active.
Issue -> Everyday from last 3 days I noticed problems with disconnecting all devices from 2.4ghz.
5ghz working fine, LAN devices OK - but all of 2.4ghz devices lost network and I cannot connect it without turn on/off 2.4 ghz. How to fix it ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @PrzemekPL
Hello, thank you for asking the community.
Regarding the 2.4G disconnection issue, try changing the 2.4G wireless security to WPA2-PSK, AES, and choosing the wireless mode to 802.11a/n/ac mixed instead of 802.11 a/n/ac/ax mixed, then monitor again.
You may also check this article to review and modify the other wireless settings or interference.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Thank you for your support.
Kevin_Z wrote
try changing the 2.4G wireless security to WPA2-PSK, AES
Ok done, changed from WPA2-PSK[AES]+WPA-PSK[TKIP] to WPA2-PSK[AES]
Kevin_Z wrote
choosing the wireless mode to 802.11a/n/ac mixed instead of 802.11 a/n/ac/ax mixed, then monitor again.
To change this setting I need turn off Smart Connect (should I?).
After turn off Smart:
802.11 ax only
802.11 b/g/n mixed
802.11 b/g/n/ax mixed (set as default)
So which one ?
Kevin_Z wrote
You may also check this article to review and modify the other wireless settings or interference.
Channels set to differ from other nearby networks (I have access to them).
- Copy Link
- Report Inappropriate Content
You may monitor the connectivity first with the wireless security WPA2-PSK, AES.
If the issue persists, please try to change the mode to 802.11 b/g/n mixed, then monitor again.
- Copy Link
- Report Inappropriate Content
Eh there is some problem... My Cameras working only with WPA Security. When I changed it to WPA2 only then cameras stopped working.
Why, if the device (Archer AX73) has a WPA security option, it is better not to use it because it may disrupt the devices?
- Copy Link
- Report Inappropriate Content
I understand that some old devices may only support WPA security, but that is less secure and it's not suggested.
Can I know what is the brand and model of the camera?
BTW, what are the security options on the AX73? Can I have a screenshot? If there is still an option for WPA without TKIP, you can give it a try.
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
I understand that some old devices may only support WPA security, but that is less secure and it's not suggested.
I understand too but not suggested and not working at all it's different.
Kevin_Z wrote
Can I know what is the brand and model of the camera?
It's some polish products, Orllo Goodcams Z6. It's worked 2 years with Huawei router without any problem.
Kevin_Z wrote
BTW, what are the security options on the AX73? Can I have a screenshot? If there is still an option for WPA without TKIP, you can give it a try.
I had to change to WPA + WPA2 because of the cameras and at 7am again I noticed no devices on the 2.4ghz network.
Screen added
- Copy Link
- Report Inappropriate Content
Thank you for getting back. If the issue persists when the security is WPA2-PSK[AES]+WPA-PSK[TKIP], I would like to escalate the case to our support engineers, who would contact you via your registered email to follow it up and provide a solution.
- Copy Link
- Report Inappropriate Content
I have since a few weeks the same problem as the topicstarter.
Once every (other) day, or one day it was even twice, all the devices (around 11) on 2.4GHz lose the connection.
Reconnecting is not possible, so I have to restart the router (or change a wifi setting, so it restarts only the wifi).
I tried all your suggestions, but everything gave the same result and didn't work.
Any other suggestions?
- Copy Link
- Report Inappropriate Content
mortael wrote
I have since a few weeks the same problem as the topicstarter.
Once every (other) day, or one day it was even twice, all the devices (around 11) on 2.4GHz lose the connection.
Reconnecting is not possible, so I have to restart the router (or change a wifi setting, so it restarts only the wifi).
I tried all your suggestions, but everything gave the same result and didn't work.
Any other suggestions?
@mortael Is your AX73 also working as AP mode?
What are the wireless security settings on the AX73 for the 2.4G network? Please post a screenshot after masking the SSID and password. Try changing the mode for the 2.4G network from "802.11b/g/n/ax mixed" to "802.11b/g/n". Thanks.
What are the devices that connect to the 2.4G network also? Are they connecting to other 2.4G networks without an issue?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2231
Replies: 9
Voters 0
No one has voted for it yet.