Como conectar a Archer MR600(4G) mas routers por DHCP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Como conectar a Archer MR600(4G) mas routers por DHCP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Como conectar a Archer MR600(4G) mas routers por DHCP
Como conectar a Archer MR600(4G) mas routers por DHCP
2022-08-09 21:00:39
Tags: #DHCP
Model: Archer A2  
Hardware Version: V2
Firmware Version: 1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n

Hola buenas, quiero explicar como he conectado en la misma red mas de 1 router. Me ha llevado bastante tiempo ya que no hay un tutorial bien explicado.

 

La conexion de internet viene por el router TP-Link Archer MR600 (A) que esta conectado a una red 4G. (este router sin wifi, DHCP desactivado,puerta acceso 192.168.1.1)

despues se conecta por cable(puerto LAN) a el un HUB (swich), que reparte la conexion a 2 equipos que tienen una IP asignada y a un router TP-link TL_MR6400 V5.2(B)(se conecta al puerto LAN, no al WAN), el cual tiene el Wifi activo y DHCP activo. Si quiero conectar otro router wifi lo conectaria al HUB(o al router A) y tendria que activar DHCP en un rango distinto al router B.

Aqui pongo las configuraciones:

 

Router A   Archer MR600 V2

  Router 4G conectado a internet - IP/puerta acceso 192.168.1.1  -  wifi desactivado (no me interesa wifi donde esta este router)

 

Router B   TL-MR6400 V5.2 

  IP 192.168.1.2 - puerta acceso 192.168.1.1 - DHCP Activado rango 192.168.1.100-192.168.1.199(por ejemplo)

  DNS Primario 8.8.8.8 - DNS Secundario 8.8.4.4(por ejemplo)

  Wifi activado RED 2

 

Router C  TP-link

  IP 192.168.1.3 - puerta acceso 192.168.1.1 - DHCP Activado rango 192.168.1.200-192.168.1.225(por ejemplo)

  DNS Primario 8.8.8.8 - DNS Secundario 8.8.4.4(por ejemplo)

  Wifi activado RED 3

 

  0      
  0      
#1
Options
2 Reply
Re:Como conectar a Archer MR600(4G) mas routers por DHCP
2022-08-12 05:42:34

  @blue_sand 

 

Hi, may I know if you have already connected them in the way you described? If so, is there any problem now?

If so, you could also consider to configure the second and third router to be wireless router mode using WAN port.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Como conectar a Archer MR600(4G) mas routers por DHCP
2022-08-13 19:28:54 - last edited 2022-08-13 19:36:53

  @Sunshine  Hi. Yes, connect it this way correctly. Now, if I want to connect one more router with Wi-Fi to another area of the house, I connect to Router A or to the HUB.
I configure the router with ip 192.168.1.(4,5,6,...), gateway 192.168.1.1, DHCP in a different range than router B and C.

 

 

I also tried the second and third router through the WAN port, but I couldn't connect to the internet, I don't know if I was doing it correctly

  0  
  0  
#3
Options