Router Archer VR900 V.3 - Bridge
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello! this is my first time posting here.
I have 2 Archer VR900 V.3
One is set to be primary as modem router.
The other, i want to set as Bridged.
I looked up online, and couldn't find how to do it. (also couldn't find system parameters in the advanced settings, what do i do for that?)
Any help or tips are much appreciatted.
Thank you and have a good day!
If you're trying to set VR900 in Access Point mode then try the following.
If your main VR900 is with LAN IP address 192.168.1.1 set the second VR900 LAN IP address in the same subnet as your main VR900 (keep it in 'DSL modem router' mode as the main VR900):
Them connect them like this: Main VR900 LAN port => Secondary VR900 LAN port.
VR900 doesn't support WDS feature nor 'Range Extender' mode, so your only option is to use it as described above.
If you're trying to set VR900 in Access Point mode then try the following.
If your main VR900 is with LAN IP address 192.168.1.1 set the second VR900 LAN IP address in the same subnet as your main VR900 (keep it in 'DSL modem router' mode as the main VR900):
Them connect them like this: Main VR900 LAN port => Secondary VR900 LAN port.
VR900 doesn't support WDS feature nor 'Range Extender' mode, so your only option is to use it as described above.