How to configer Deco M4R with my existing network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to configer Deco M4R with my existing network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to configer Deco M4R with my existing network
How to configer Deco M4R with my existing network
2022-08-22 08:14:11 - last edited 2 weeks ago
Model: Deco M4  
Hardware Version:
Firmware Version:

My Deco working fine but its give me separate IP address 192.168.68.*** where as My current IP address is 192.168.1.*** series.

Need help to Configure it with my existing network.

 

Regards

Chayan

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to configer Deco M4R with my existing network-Solution
2022-08-22 11:35:03 - last edited 2022-08-23 03:35:22

  @Chayan_Paul 

 

You need to configure Deco mesh to run in Access Point mode. In that mode, all devices will be on the same 192.168.1.* subnet. Follow this document: How to set up Deco to work in Access Point mode

Recommended Solution
  2  
  2  
#2
Options
1 Reply
Re:How to configer Deco M4R with my existing network-Solution
2022-08-22 11:35:03 - last edited 2022-08-23 03:35:22

  @Chayan_Paul 

 

You need to configure Deco mesh to run in Access Point mode. In that mode, all devices will be on the same 192.168.1.* subnet. Follow this document: How to set up Deco to work in Access Point mode

Recommended Solution
  2  
  2  
#2
Options