Accepted MTU size settings
MTU size. I am connected behind optical network provider router that connects using PPoE, however my DECO network (4 times X20) connects to the router and does not set the correct MTU (it is set up as a simple Access point). That makes some connection issues, like google voice assistants never connecting on first request. I am almost sure, manual setting of MTU on DECO would fix this issue, as no issues appear when I connect directly through my optical network operator's router wifi.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP Do you know when this is include BE85? I don't understand why it isn't already
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Please add MTU support for the X60.
A lot more of us are getting on Home Wireless 5G Networks and really need to change this. Thank you!
- Copy Link
- Report Inappropriate Content
@David-TP I have the latest firmware installed on my XE75, but mtu still limited to 1492, ehile my (and most) providers require 1500. So inlike what you stated this is not updated in the latest firmware. When will it be updated?
- Copy Link
- Report Inappropriate Content
@David-TP I have the 2.0 hardware version of the Deco XE75 Pro. The product page does not list firmware for the V2 which is what I have. But it does list it for the V1. https://www.tp-link.com/uk/support/download/deco-xe75-pro/v2/
I have the device setup in AP mode as i use PFSense as a router and don't want a double NAT. However, it seems the settings for MTU would be under internet options, which when in AP mode doesnt show up.
Please could someone make the latest firmware available for the V2 and also allow us to set the MTU when in AP mode. I am struggling to get close to 2.5Gbit, I am getting around 1,300 mbps over wifi 6E. I have set the MTU's on my speed test server as well as PFSense to 9,000, but the deco doesn't seem to be changing to this.
The V1 has a latest version of 1.2.3 Build 20230810
But the V2 is lagging behind: 1.2.2 Build 20230601
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 22
Views: 14210
Replies: 27