Speed stuck at 100 Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Speed stuck at 100 Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AtithPast

2022-10-11 14:44:39

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-10-11

Speed stuck at 100 Mbps

2022-10-11 14:44:39

Tags: #Bandwidth Control/QoS

Model: TL-WR845N

Hardware Version: V4

Firmware Version: 0.9.1.3.17 v0001.0 Build 201214 Rel.67500n

I have a internet plan of 200 mbps but the router doesn't go above 100 mbps even though it says upto 300 mbps.

I checked directly from cable it shows around more than 180 mbps but router slows it down.

Is there any settings that can be changed to resolve this.

1 Reply

Philbert

LV5

2022-10-11 20:17:45 - last edited 2022-10-11 20:23:12

Posts: 2607

Helpful: 1546

Solutions: 273

Stories: 0

Registered: 2020-11-08

Re:Speed stuck at 100 Mbps

2022-10-11 20:17:45 - last edited 2022-10-11 20:23:12

@AtithPast

Hey

Sadly not is the short answer. What you are experiencing is the limitations of the N grade router (also known as WiFi4), this router has a 100MB LAN cable connection so that is your limiting factor there. There is also a possible WiFi limitation

The router you have is N Grade and can support up to 300mbps on 2.4ghz frequency. Sadly the nature of modern WiFi means the 2.4ghz is VERY congested and performance does suffer as a result, that is why they moved to 5ghz (and now 6ghz)

When running a N Grade device on 2.4ghz its expected that speeds would be around 72/80mbps so you are doing quite well at 100.

If you want faster you will need to move to a WiFi5 (AC Grade) or WiFi6 (AX Grade) device and use the 5ghz frequency, that should get you around 400mbps or more over WiFi and have a 1000MB LAN port, which is faster than your internet so perfect!

Speed stuck at 100 Mbps

Speed stuck at 100 Mbps

Information

Voters 0

Tags