X60 Ethernet backhaul
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bonjour a tous,
j'ai un problème avec mes 3 x60. Ils sont tous connecté à mon réseau ethernet de la maison, mais j'ai systématiquement une base qui est en wifi... de plus elle fait relais avec la troisième... si j'essaye de t'ébouter, pareil... j'avoue ne pas comprendre... je vous mets la capture si ça peut servir
si quelqu'un à la solution je suis preneur...
merci d'avance,
emmanuel
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I solved the problem !
I have reset my 3 deco x60 as said in the us faq. I have setup just the first x60 directly plugged to my isp modem, then I lighten up the 2 other satellites, they connected automatically to the first one in wifi. Then I connected them via Ethernet to my isp modem... tada... it was working!
then I re plugged the satellites at their place (office and bedroom) and then the connection went back to wifi...😡 So, I checked my home network and I saw that my electrician switched lan cable and tv cable, so I think it was a mess in my home switch (this kind of switch is able to distribute satellite tv, land line phone through the same ethernet cable)... I re plugged correctly and it is working now !!
see you !!
Emmanuel
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
Are all the three Deco X60s connected to the same network switch, like:
/-satellite Deco X60-1
ISP modem router---network switch--main Deco X60
\-satellite Deco X60-2
or like ISP modem router-----main Deco X60----satellite X60-1-----satellite X60-2
If there is a network switch, may I know its model number?
And the following link might be helpful, especially Q5+Q6:General questions about Ethernet Backhaul feature on your Deco
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Thanks David for your quick answer. Yes, I have a switch behind my ISP modem. It is a Legrand Triple Play Gigabit reference : 413044
I didn't find the Q5 and Q6 you mentioned. Perhaps it is because the link sent me to a French page ?
thanks,
Emmanuel
- Copy Link
- Report Inappropriate Content
I solved the problem !
I have reset my 3 deco x60 as said in the us faq. I have setup just the first x60 directly plugged to my isp modem, then I lighten up the 2 other satellites, they connected automatically to the first one in wifi. Then I connected them via Ethernet to my isp modem... tada... it was working!
then I re plugged the satellites at their place (office and bedroom) and then the connection went back to wifi...😡 So, I checked my home network and I saw that my electrician switched lan cable and tv cable, so I think it was a mess in my home switch (this kind of switch is able to distribute satellite tv, land line phone through the same ethernet cable)... I re plugged correctly and it is working now !!
see you !!
Emmanuel
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 525
Replies: 3
Voters 0
No one has voted for it yet.