Home

Forums

Stories

Knowledge Base

Home Network Community > Range Extenders > RE505X extender - no 2.4GHz when in Onemesh mode

< Range Extenders

RE505X extender - no 2.4GHz when in Onemesh mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE505X extender - no 2.4GHz when in Onemesh mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

BertranddaSilva

2023-01-09 19:03:52

Posts: 5

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2023-01-09

RE505X extender - no 2.4GHz when in Onemesh mode

2023-01-09 19:03:52

Model: RE505X

Hardware Version: V1

Firmware Version: 1.0.12 Build 20211107 Rel. 182157

Hi Guys!

How are you going!? Happy New Year for all of you!!

Folks, I've just settedup my new TP-Link devices, a Archer AX73 and a RE505X, and they work well almost a month, until tomorrow, when the repeater stop to broadcast 2.4gHz wireless network. Just like the thread below...

https://community.tp-link.com/en/home/forum/topic/257304

Both devices FW are up-to-date. And I've tryed all tips recomended in the links below, even they had been recomended to for other brands...

https://community.tp-link.com/en/home/stories/detail/501914

https://www.tp-link.com/pt/support/faq/2234/

Please, do you have any solution for this already known issue?

Thank you!

Nice regards,

Bertrand da Silva

3 Reply

David-TP

2023-01-12 11:47:23

Posts: 12878

Helpful: 1817

Solutions: 1300

Stories: 9

Registered: 2020-04-14

Re:RE505X extender - no 2.4GHz when in Onemesh mode

2023-01-12 11:47:23

@BertranddaSilva

Hi, I would like to forward your case to the senior engineers for further assistance. Please check whether you could get an email from me later.

At the same time, could you please help me check some details:

1. Did the 2.4ghz of main AX73 still work well?

2. Would there be a temporary solution to get 2.4ghz back, such as a reboot of AX73 or RE505X?

3. If not in OneMesh mode, using as a normal repeater, will you get a stable blue LED on 2.4ghz and 5ghz?

4. Were you able to reproduce this issue most of the time or How long will it take before the 2.4ghz LED is off after enabling OneMesh mode?

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

BertranddaSilva

LV1

2023-01-16 16:29:33

Posts: 5

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2023-01-09

Re:RE505X extender - no 2.4GHz when in Onemesh mode

2023-01-16 16:29:33

Hi @David-TP!

Sorry late answer.

1. AX73 still working very well. Due to RE505X fail, it was needed to connect some older repeaters on it using 2.4gHz.

2. RE505X never connect bak while OneMesh was activated, no matters both devices were rebooted or switched off/on.

3. Yes, if not in OneMesh mode, 2.4gHz and 5gHz work fine and both LEDs stay blue and stable.

4. Yes the issue was reproduced three or four times, while I was trying to reconfigure both devices to OneMesh mode. After enable OneMesh 2.4ghz goes of immediately.

Kind regards,

Bertrand da Silva

David-TP

2023-01-17 09:01:51

Posts: 12878

Helpful: 1817

Solutions: 1300

Stories: 9

Registered: 2020-04-14

Re:RE505X extender - no 2.4GHz when in Onemesh mode

2023-01-17 09:01:51

@BertranddaSilva

Hi, Thanks for the update.

Your case has been forwarded to the senior engineer and he will help you run the further test. Please check the email #TKID230121690 for more details.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

RE505X extender - no 2.4GHz when in Onemesh mode

RE505X extender - no 2.4GHz when in Onemesh mode

Information

Voters 1

Tags