Home Network Community > 3G/4G Routers/MiFi > Archer mr600 connection stability fail and won't update
< 3G/4G Routers/MiFi

Archer mr600 connection stability fail and won't update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer mr600 connection stability fail and won't update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer mr600 connection stability fail and won't update
Archer mr600 connection stability fail and won't update
2023-02-17 21:51:08
Tags: #Firmware Update #connection stability
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.0.0 0.9.1 v0001.0 Build 210629 Rel.59196n

I'm having stability problems from the start, but they seem to get worse over time. 

I tried doing the firmware update, but it gives me 71211 error, and the automatic one says it's up to date (it's not)

 

I tried with two versions, but no luck, still same error.

Archer_MR600v2_1.6.0_0.9.1_[220105-rel58321]_up_boot_Release_2022-01-05_16.41.23.bin

Archer_MR600v2_1.5.0_0.9.1_[210914-rel59719]_up_boot_Release_2021-09-14_16.52.15.bin

 

 

It happens on LAN cable and on wi-fi, same moments.

The connection is working, but choking:

  0      
 
  0      
 
#1
Options
5 Reply
Re:Archer mr600 connection stability fail and won't update
2023-02-18 09:05:23

  @hefseth 

 

Here is the status during the choke and the log

 

 

as the file fails to upload, here is the LOG

 

  0  
  0  
#2
Options
Re:Archer mr600 connection stability fail and won't update
2023-03-01 03:56:00

  @hefseth 

 

Hi, may I know where you got this MR600?

Upon checking, the current firmware on your MR600 is a customized firmware for PLPLAY(ISP Play in Poland), that is why you are unable to install the common EU version firmware.

 

Since it is an ISP customized firmware, please contact the ISP to report the issue, as we are not allowed to modify customized firmware without their permission.

TP-Link Annual Community Survey | Help Shape Our Community Throughout 2024!
  0  
  0  
#3
Options
Re:Archer mr600 connection stability fail and won't update
2023-03-01 11:33:14

  @Sunshine 

 

Yeah, it's from a telecom. I bought it from someone else. 

I can try and contact them, but I doubt they will be very helpful, as it was not bought directly from them.

 

I get that the update is not working, but still the amount of connectivity drops without any reason or lights change is very annoying... I'm moving it around the house to see what happens, but the improvement is minimal and for a very short time.

 

Any other ideas?

  0  
  0  
#4
Options
Re:Archer mr600 connection stability fail and won't update
2023-03-09 06:04:32

  @hefseth 

Please check if it has manual band selection function on the product, if so, you could try to select 4G band manually to see if it would be more stable:

https://www.tp-link.com/en/support/faq/3099/

TP-Link Annual Community Survey | Help Shape Our Community Throughout 2024!
  0  
  0  
#5
Options
Re:Archer mr600 connection stability fail and won't update
2023-03-13 13:12:47

  @Sunshine 

 

I actually did try, but it didn't change anything for me. I live just outside the city, so the signal is not very strong, but I do get 4G all the time.

 

I also tried to set primary and secondary DNS like I found on some page, but it only helped like a bit.

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 421

Replies: 5

Tags

Firmware Update
connection stability
About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.