Solution Internet works fine via LTE Gateway Router but Tether App shows it offline when managed remotely
Solution Internet works fine via LTE Gateway Router but Tether App shows it offline when managed remotely
This Article Applies to:
TP-Link LTE Gateway Routers that support cloud management via Tether App
Issue Description/Phenomenon:
1. The LTE Gateway Router is connected to the internet and bound to your TP-Link ID for cloud management
2. All client devices connected to the LTE Gateway Router are able to access internet without any problem
3. You are able to manage the LTE Gateway Router locally via Tether App when connected to the LTE Gateway Router
4. When you are in a different network, Tether App shows the LTE Gateway Router offline, thus you are unable to manage the device remotely.
5. If you reboot the LTE Gateway Router, it would be online for several minutes on Tether App, but the same issue will appear again later even though internet still works fine
Available Solutions:
The following official firmware has already solved the problem, please update the firmware to the latest version:
For Archer MR600 (EU) V2: Archer MR600(EU)_V2_220826
For Archer MR600 (EU) V3: Archer_MR600(EU)_V3_220727
For TL-MR6400 (EU) V5.30: TL-MR6400(EU)_V5.30_221121
For TL-MR6400 (APAC) V5.30: TL-MR6400(APAC)_V5.30_221121
Notes: 1. Some of the above official firmware might not be available on official website yet because they are still in releasing process.
2. Please do verify the hardware version on the label of the device itself before updating the firmware, for example, if your device is V5.0 or V5.20, it will not work to install V5.30 firmware.
For Archer MR400 (EU) V4.0, please install the following beta firmware:
https://static.tp-link.com/upload/beta/2023/202302/20230223/Archer_MR400(EU)_V4_230222.zip
If you have the same issue with other models, or still have the issue after installing the above firmware, please let us know your model number, hardware and firmware version, then send me a private message to provide the MAC address of your device and your TP-Link ID.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine Hello, unfortunately BETA firmware didn't solved this problem for me on TP-Link Archer MR400 (V4.30). I can provide some additional technical details, e.g. traceroute to the TP-Link Cloud servers from this router or something like this if it helps. I've sent screenshots of this problem to your DMs.
- Copy Link
- Report Inappropriate Content
Hi, the device never connects to the cloud successfully, right? will a reboot or factory reset solve the problem temporily?
If possible, please try a different SIM card to see if the issue still happens, if so, I would like to escalate your case to our senior engineer for debugging.
- Copy Link
- Report Inappropriate Content
@Sunshine Hello. Sorry for the delay.
> device never connects to the cloud successfully, right?
Yes
Reboot and factory resed didn't solved the problem unfortunately. I've also tried another SIM card, it also didn't helped.
- Copy Link
- Report Inappropriate Content
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
Hi Sunshine,
i have the Same Problem with my MR200 Ver 6.0 running on 1.1.0 0.9.1 v0001.0 Build 230516 Rel.64685n
ISP is A1 in Austria.
Best regards and thx for ur help
Michael
- Copy Link
- Report Inappropriate Content
@Sunshine got same issue on MR600 v1
- Copy Link
- Report Inappropriate Content
@Sunshine I have same problem for my archer c80 router
- Copy Link
- Report Inappropriate Content
Hello,
I have the same problem with a MR600 V1
- TP Link Cloud
The device is offline. Please check the WAN and network configuration to make sure the appropriate settings are entered correctly.
- Speed test
Fail also
All if fine, only the two functions above are not working
The MR600 is connected to internet via the lan to the external router
- IP of MR600 192.168.2.1 192.168.2.XXX Network for wifi and LAN
- IP of MR600 WAN 192.168.1.90 192.168.1.XXX Network for connection between MR600 and router
- IP of router WAN 192.168.1.1
Firmware Version:1.3.0 0.9.1 v0001.0 Build 210608 RC.66100n Hardware Version:Archer MR600 v1 00000001
Thanks for your help
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 3766
Replies: 18
Voters 1