VM Business and static ip address setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VM Business and static ip address setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AMCross

2023-05-15 18:31:59 - last edited 2023-05-17 06:00:20

Posts: 6

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2020-02-03

VM Business and static ip address setup

2023-05-15 18:31:59 - last edited 2023-05-17 06:00:20

Model: ER605 (TL-R605)

Hardware Version: V2

Firmware Version:

got a nice little system running with an OC300 couple of poe switches and some EAP225 all running fine

THEN VM drop a lease line on me with a static ip address

How do i change over from the DHCP setup that their router gives me to this static setup

do i need to buy an ER605 and setup that with the WAN as their static ip

1 Accepted Solution

d0ugmac1

LV5

2023-05-16 14:09:36 - last edited 2023-05-17 06:00:20

Posts: 2103

Helpful: 766

Solutions: 190

Stories: 0

Registered: 2022-03-05

Re:VM Business and static ip address setup-Solution

2023-05-16 14:09:36 - last edited 2023-05-17 06:00:20

@AMCross

Correct, you need DHCP and NAT functionality, and if the ISP isn't supplying the router function in their box, then you'll need to add that back. ER605v2, or better ER7206, if you have the coin will do that. As a side benefit, by adding an Omada controlled gateway, you'll start to get a lot more stats and control over traffic flows and forwarding.

<< Paying it forward, one juicy problem at a time... >>

VM Business and static ip address setup

VM Business and static ip address setup

Information

Voters 0

Tags