25
Votes

WiFi - Default 20Mhz channel on 2.4Ghz Band

 
25
Votes

WiFi - Default 20Mhz channel on 2.4Ghz Band

22 Reply
RE:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-05-31 20:23:27
Same with my IoT devices.
#12
Options
RE:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-06-12 14:11:59
Deco 2.4GHz 40MHz interfere my other 2.4 GHz tp-link router. And Deco 2.4GHz 40MHz itself has slower speed than 2.4GHz 20MHz setting
#13
Options
Re:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-07-06 12:10:38

 This is clearly needed for 2,4Ghz band since using 40Mhz is a terrible ideia in most home environments. Please allow us to choose 20mhz and also the channels along with it.

#14
Options
RE:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-07-06 12:11:07
Its urgently needed for Deco x75 v1 and v2!
#15
Options
RE:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-07-16 18:26:09
Some of us do need Channel selection as well. The "Optimization" for the Deco M5 always "perfect." However, my Decos almost always choose the same channel as my next door neighbor. Combined with the 40Gz width, I'm surprised he hasn't come by to complain, and my IoT devices disconnect and reconnect about every two to three minutes.
#16
Options
Re:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-07-16 23:11:53 - last edited 2024-07-16 23:14:01

  @David-TP 

 

What if you use the Wi-Fi Interference tool in the Deco Lab?

 

Even after "Network Optimization" is run and says "perfect," the Wi-Fi Interference tool in the Deco Lab almost always shows High interference on my 2.4GHz band. Often, it indicates that Deco has chosen the exact same channel as my next-door neighbor. Rarely, after a network reboot, it might show Medium for a day or two.

(M5 v3, four nodes, latest firmware) 

 

Use Wi-Fi Interference tool in the Deco Lab to trigger 20MHz width when interference is Medium or High, and even actually try to find a clear(er) channel. The "Network Optimization" in the main settings is useless.

 

What is the point of an IoT net that doesn't work? From the other threads, this has been going on for well over two years, maybe longer.

#17
Options
Re:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-07-21 22:21:13

Going to sell my four Deco's X75. Its impossible to work with such a closed down mesh system, where you cant even select the band and channels of 2,4Ghz not to speak about the 20MHz frequency.

#18
Options
Re:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-08-04 20:47:27

+1,

Option to set 2.4Ghz channel width to 20Mhz only still missing.
Apple devices fail to work stable on 40 Mhz width.

Yet there is a selector 160<>80 for modern 5Ghz, come on.

#19
Options
RE:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-08-04 20:48:08
Every TP-Link model had this option, but not Deco.
#20
Options
Re:WiFi - Default 20Mhz channel on 2.4Ghz Band
2024-09-08 17:47:13

Hello,

Still hope to see 20Mhz default soon. 

Thank you.

#21
Options