Cant adopt first EAP225-outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cant adopt first EAP225-outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cant adopt first EAP225-outdoor
Cant adopt first EAP225-outdoor
2023-07-04 03:00:44
Model: EAP225-Outdoor  
Hardware Version:
Firmware Version:

Hi Guys

 

I have an OC300 and a bunch of EAP225-outdoor units.  I have a nokia fastmile 5g router from optus.  The OC300 runs off the optus router, then one eap225 is hardwired to the router also.  The others bounce off that.


It's all been working fine untli yesterday when my optus unit dropped out.  Rebooted that. 

 

It now wont adopt the first eap225. 

 

The IP on the nokia fastmile is 192.168.1.254 yet thge IP on the first hard wired EAP is 192.168.0.254.  I cant see it in the list of devices been given an IP by DHCP in the nokia fastmile router.  I have tried turning off DHCP in the OC300 but still nothing.


Any ideas on what I can do to troubleshoot? I've hard reset everything a couple of times too. Still nothing. 

  0      
  0      
#1
Options
1 Reply
Re:Cant adopt first EAP225-outdoor
2023-07-04 11:49:09

  @alexi82 Just to clarify, you say that you turned DHCP off on the OC300.   I personally would leave DHCP on for the OC300.for now so it gets assigned by your router.  What ip address are you typing into browser to bring up the controller interface? That is the IP address of the OC300 and if your router in the 192.168.1.xxx range then the OC300 would need to be the same subnet, for example 192.168.1.X and not 192.168.0.X. 

  0  
  0  
#2
Options