Home Network Community > Powerline Adapters > Is AV600 linked?
< Powerline Adapters

Is AV600 linked?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Is AV600 linked?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is AV600 linked?
Is AV600 linked?
2023-07-08 08:59:32 - last edited 2023-07-12 06:34:17

Have just joined this forum and have looked at many posts but still am not clear about this.

I've had AV600s working for some years now but need some advice.

How do I know if an adapter is working?

I was hoping to set up a unit in my summer house which is about 50 metres from the house and about 75 metres from the router.

The Power LED (NOT the Powerline LED) is flashing once every 10 seconds, the Powerline LED is off.

It's not possible to  connecting an ethernet device to the adapter.

Any advice would be welcome.

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Is AV600 linked?-Solution
2023-07-08 15:25:51 - last edited 2023-07-12 06:34:17

  @bill-lancaster 

 

Hi,

 

I recommend you download the user's manual for your particular AV600 model (check on the label of the adapter) and read about the meaning of the LED indicators. (below screenshot is just an example for a random TP-Link Powerline adapter)

 

Anyway, what you should do is to plug both Powerline adapters in sockets that are located fairly close together. Then perform the pairing procedure according to the instructions in the user's manual and make sure both, the Power LED and the Powerline LED are solid ON after the pairing is completed. Then plug both Powerline adapters in the sockets at the locations where you intend to use them. If the Powerline LED doesn't become solid ON after a while, then it means the Powerline adapters are unable to establish a proper connection with each other between those two locations.

 

 

Recommended Solution
  2  
  2  
#2
Options
Re:Is AV600 linked?-Solution
2023-07-14 08:49:00 - last edited 2023-07-14 08:49:10

  @bill-lancaster Thank you for your help.

I have an TL-PA4010 connected to the router and two other PA4010's on the network (TV and PC).  These are all working fine.

Am now having trouble linking the TL-WPA4220 which I have moved from the summer house to a socket near the router.

The TL-WPA4220 just has the top 'Power' and the lower 'WIFI' LEDs ON.  Pressing its pair button for 1 second does not have any effect.  Pressing its reset for 10 seconds causes all the LEDs to go off then after a few seconds just the top and lower LEDs are ON.

 

Any advice would be welcome.

 

Question:  When the PA4010 in in power save (all the LEDs off)  does the link button work or does the unit need to come out of power save.

Recommended Solution
  0  
  0  
#7
Options
10 Reply
Re:Is AV600 linked?-Solution
2023-07-08 15:25:51 - last edited 2023-07-12 06:34:17

  @bill-lancaster 

 

Hi,

 

I recommend you download the user's manual for your particular AV600 model (check on the label of the adapter) and read about the meaning of the LED indicators. (below screenshot is just an example for a random TP-Link Powerline adapter)

 

Anyway, what you should do is to plug both Powerline adapters in sockets that are located fairly close together. Then perform the pairing procedure according to the instructions in the user's manual and make sure both, the Power LED and the Powerline LED are solid ON after the pairing is completed. Then plug both Powerline adapters in the sockets at the locations where you intend to use them. If the Powerline LED doesn't become solid ON after a while, then it means the Powerline adapters are unable to establish a proper connection with each other between those two locations.

 

 

Recommended Solution
  2  
  2  
#2
Options
Re:Is AV600 linked?
2023-07-10 11:07:38

  @bill-lancaster Thank you for the advice, I'm a lot clearer now.

Regards

  0  
  0  
#3
Options
Re:Is AV600 linked?
2023-07-11 12:17:32

  @bill-lancaster Not there yet though!

The TL-PA4010 in the summer house has both the 'Power' LED and the 'PowerLine' LED on but my wifi network is not available.

Installed a TL-WPA4220 and noticed that there was a network available called TP-Link_590.  Have failed to make a connectionIs to this network, is this possible?

  0  
  0  
#4
Options
Re:Is AV600 linked?
2023-07-11 13:05:19

  @bill-lancaster Found the connection details on the back of the unit. My device now logs into it but I realise that this probably won't give me access to my main wifi network.

  0  
  0  
#5
Options
Re:Is AV600 linked?
2023-07-11 19:30:27

  @bill-lancaster 

 

The unit labelled TL-PA4010 is the one that has to be connected via Ethernet cable to your router and the TL-WPA4220 is the one that has the Wi-Fi and therefore has to be plugged into a socket in your summer house.

 

Once it has been set up like that and also the Powerline LEDs are solid ON on both units the network should be operational and if you connect youself to the "TP-Link_590" Wi-Fi you should have access to the whole network that your router provides. It doesn't matter that the Wi-Fi name is different.

 

If you feel having a different Wi-Fi name and password in you summer house is inconvenient, then you can change them to be the identical to the one's of the router.

There are two ways to do that (via the configuration interface or by pressing physical buttons, aka "Wi-Fi Clone") and both methods are described in the user's manual of the Powerline adapter, which can be found here. https://www.tp-link.com/en/support/download/tl-wpa4220-kit/

 

  0  
  0  
#6
Options
Re:Is AV600 linked?-Solution
2023-07-14 08:49:00 - last edited 2023-07-14 08:49:10

  @bill-lancaster Thank you for your help.

I have an TL-PA4010 connected to the router and two other PA4010's on the network (TV and PC).  These are all working fine.

Am now having trouble linking the TL-WPA4220 which I have moved from the summer house to a socket near the router.

The TL-WPA4220 just has the top 'Power' and the lower 'WIFI' LEDs ON.  Pressing its pair button for 1 second does not have any effect.  Pressing its reset for 10 seconds causes all the LEDs to go off then after a few seconds just the top and lower LEDs are ON.

 

Any advice would be welcome.

 

Question:  When the PA4010 in in power save (all the LEDs off)  does the link button work or does the unit need to come out of power save.

Recommended Solution
  0  
  0  
#7
Options
Re:Is AV600 linked?
2023-07-14 20:07:28

  @bill-lancaster 

 

According to the user manual (see below) a blinking Power LED indicates the Powerline adapter is trying to pair. If it's not blinking, then it is not in "Pair" mode.

Try pressing the Pair button somewhat longer than one second.

 

And it's the same for both Powerline adapters to be paired. If the Power LED on the adapter that is in power save mode doesn't start blinking, then it likely means pairing doesn't work in power save mode.

If none of your three TL-PA4010 units is currently active (all in power save), then you will need to find a way to wake at least one up to pair it with the TL-WPA4220. 

 

 

  0  
  0  
#8
Options
Re:Is AV600 linked?
2023-07-15 12:38:50

  @bill-lancaster Thanks for that.

I moved the WPA4220 to a socket right next to a working PA4010.  The PA4010 had all its LEDs ON and steady.

The WPA4220 has only Power and the lower (WIFI) LEDs ON.

Pressed the PA4010 link button for 2-3 seconds, Power LED starts to blink.

Pressed the WPA4220 link button, nothing happened.

With a pin I pressed the reset button for 10-12 seconds, all LEDs went off then just the top(Power) and bottom(wifi) came on.

I've been messing about with this poor WPA4220 for several days now and it seems to have stopped working.

I can connect my mobile 'phone to it and can see a number of the adaptor's settings.

  0  
  0  
#9
Options
Re:Is AV600 linked?
2023-07-15 14:21:23

  @bill-lancaster 

 

That is very unfortunate.

 

In case it was just the Pair button that has given up, there is actually another way to add a new Powerline adapter to an existing network by using the so-called "tpPLC Utility" that can be downloaded from TP-Link's website.

 

Instructions can be found here: https://www.tp-link.com/en/support/faq/1615/

 

  0  
  0  
#10
Options
Re:Is AV600 linked?
2023-07-18 10:36:44

  @bill-lancaster Thabnks woozle

I'm all Linux at home so borrowed a W10 PC and installed the app, added the adaptor, I now have Power, Power Line & WIFI LEDs ON.

Phew!

Thanks for all your help

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1079

Replies: 10

Related Articles
Problem with AV600
6492 0
AV600 with VPN
749 0
AV600 not working
154 0
 AV600 Nano & AV600
608 0
Linked Deco Unavailable for current firmware
688 0
Can the RE305 be linked together to extend the network.
984 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.