OpenVPN TLS Version error
OpenVPN TLS Version error
I recently bought an Archer VR2100 and set up the OpenVPN server on it, so I can access my home network when I am out of home. I downloaded the OpenVPN client for my Macbook Air and installed the configuration file. I get an error on the OpenVPN client saying that "Authentication Failed Server TLS Version too low". What is going wrong? Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi All，
For the OpenVPN TLS Version error issue, please refer to the solution in this thread and let us know if it resolves the problem:
"Authentication failed, Server TLS version is too low" appears when connecting to OpenVPN Server
- Copy Link
- Report Inappropriate Content
Hi, do you mean the OpenVPN client software fails to connect the OpenVPN Server with error "Authentication Failed Server TLS Version too low"?
What is the version of your OpenVPN Client software? If possible, please test a lower version client software to see if it has the same error.
By the way, what is the hardware and firmware version of your Archer VR2100?
- Copy Link
- Report Inappropriate Content
Correct - the OpenVPN client software fails to connect to the OpenVPN Server with error "Authentication Failed Server TLS Version too low"
The OpenVPN client software is version 3.4.3.
I tried to download an earlier version but it failed to install.
FYI - The Tunnelblick client seems to work OK, but I would prefer to use the official OpenVPN client if possible.
Thanks,
Ian
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the reply.
May I know what the hardware and firmware version of your Archer VR2100 is?
- Copy Link
- Report Inappropriate Content
Hi @Sunshine
The Hardware is version V1.
The firmware is 1.6.0 0.9.1 v009e.0 Build 220518 Rel.41627n
Thanks
- Copy Link
- Report Inappropriate Content
Hi,
just messing around with exactly the same Problem on a VR2100 and it is VERY annoying !!!
at the moment VPN only works with PPTP.
so please TP Link, fix this!
Regards
Gremnet
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
checked this out:
now i'm using OpenVPN Client 2.5.0 on both Windows 7 and 10.
It is working!
I had to change the IP-Range from 10.0.8.x to 10.0.9.x to get the routing work properly.
On Android Version 0.7.5 is working (you have to download the APK from a suitable site)
BUT: the old TLS versions are a security risk. TP-Link should fix this in the Firmware or makes it possible to update the Server itself.
- Copy Link
- Report Inappropriate Content
Hi All，
For the OpenVPN TLS Version error issue, please refer to the solution in this thread and let us know if it resolves the problem:
"Authentication failed, Server TLS version is too low" appears when connecting to OpenVPN Server
- Copy Link
- Report Inappropriate Content
Hello!
tried this at a Debian System, it worked.
Have no actual Client installed on Windows, i'll try this next week.
older Client V2.5.0 works on both Win 7 and 10
BUT: this is a major security leak anyway, TLS 1.0 is VERY outdated....
Regards
Gremnet
- Copy Link
- Report Inappropriate Content
Hi, thanks a lot for the feedback, we have reported the issue to our senior engineer and as you can see, we have made beta firmware for some models to support higher TLS version.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 9811
Replies: 20
Voters 1
