Home

Forums

Stories

Knowledge Base

Home Network Community > DSL Modem Routers > [Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

< DSL Modem Routers

[Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

KD276

2023-08-30 14:54:20 - last edited 2023-08-30 14:55:38

Posts: 2

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2023-08-30

[Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

2023-08-30 14:54:20 - last edited 2023-08-30 14:55:38

Tags:

Model: Archer VR1210v

Hardware Version: V1

Firmware Version: 2.0.0 0.9_v6041.0_Build_221027

Hello, as the title said, is possible to set the wan port as a 5th lan port for my external devices?

If is possible how i can do it? Do not find the option, or maybe is automatic based on the device i connect? In this case a laptop.

Thank you.

2 Reply

terziyski

LV7

2023-08-30 20:06:01

Posts: 7017

Helpful: 5225

Solutions: 1159

Stories: 7

Registered: 2013-10-12

Re:[Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

2023-08-30 20:06:01

@KD276

This device is provided by your ISP - any questions regarding its operation should be routed to your ISP.

In general the WAN port is used when the modem operates as wireless router - when you use the FTTH/FTTB service.

I presume you are using the modem's xDSL port and the WAN port is probably inactive.

Actually the easiest way to check if that's possible is to plug your laptop in the WAN port and see if it will obtain a valid IP address from the modem.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

KD276

LV1

2023-08-30 21:11:48 - last edited 2023-08-30 21:13:57

Posts: 2

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2023-08-30

Re:[Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

2023-08-30 21:11:48 - last edited 2023-08-30 21:13:57

@terziyski Thank you for your info, yes, i'm using the modem as normal VDSL, using the DSL port RJ11 to have access to internet, so the wan port is unused.

Unfortunately it don't work for my purpose, and there is no way to change the setting to change the wan port into lan port.

Well, the only solution is to buy a generic gigabit switch (minimun i found is 4 ports) and connect it to the 4th lan port on the Tp-Link so i can connect my left devices (need 5 lan ports overall). Sad there is no such option, would have been very good but well, it can't be helped.

[Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

[Archer VR1210V] Using the WAN port as a 5th LAN ethernet port

Information

Voters 0

Tags