Wired EAP235-Wall as mesh uplink?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wired EAP235-Wall as mesh uplink?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wired EAP235-Wall as mesh uplink?
Wired EAP235-Wall as mesh uplink?
2023-09-09 13:04:26 - last edited 2023-09-11 08:01:38
Model: EAP235-Wall  
Hardware Version: V1
Firmware Version: 3.1.1

This is an old question, I replay it to know if there are any update.

Can the eap235-wall be configured to act as an uplink device for a mesh connected AP EAP265 HD(US) v1.0 ?

 

The mesh network has been configured through the Omada controller all EAP235-wall and eap265 connected through the wired network.

 

Am I simply incorrect in thinking the EAP235-wall was capable of being an uplink device within a (partial) mesh network?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Wired EAP235-Wall as mesh uplink?-Solution
2023-09-09 15:20:00 - last edited 2023-09-11 08:01:38

  @Nasser_Alrajeh 

 

The aren't any -Wall EAPs that support meshing unfortunately.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Wired EAP235-Wall as mesh uplink?-Solution
2023-09-09 15:20:00 - last edited 2023-09-11 08:01:38

  @Nasser_Alrajeh 

 

The aren't any -Wall EAPs that support meshing unfortunately.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options
Re:Wired EAP235-Wall as mesh uplink?
2023-09-15 23:23:32

  @d0ugmac1 Thanks

  0  
  0  
#3
Options
Re:Wired EAP235-Wall as mesh uplink?
2023-09-15 23:31:51

  @Nasser_Alrajeh sorry about the answer, there is no good reason not to enable mesh on these devices but they don't.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#4
Options