Can WPS be disabled on an Archer C64 joined to an existing EasyMesh network as a satellite router?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can WPS be disabled on an Archer C64 joined to an existing EasyMesh network as a satellite router?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can WPS be disabled on an Archer C64 joined to an existing EasyMesh network as a satellite router?
Can WPS be disabled on an Archer C64 joined to an existing EasyMesh network as a satellite router?
2023-09-12 07:21:13 - last edited 2023-09-16 00:38:31
Model: Archer C64  
Hardware Version: V1
Firmware Version: 1.13.2 Build 230824 Rel.74702n(4555)

Hi, I have recently acquired an Archer C64 router to use as an additional satellite router for my existing EasyMesh setup. So far, it was able to join my existing network, however, I noticed that while running a wireless scan on one of my devices, the WPS feature is enabled on the C64, despite being disabled on the main router (Archer AX23).

 

The security is set to WPA3-Personal+WPA2-PSK[AES] on the AX23, which automatically disables the WPS feature on the AX23. The WPS feature cannot be enabled on the AX23 unless I switch the security to a non-WPA3 mode.

 

Furthermore, switching the security to WPA3 only (no WPA2) on the AX23 successfully disables WPS on the C64, however, some older devices on the network are unable to connect in this case due to lack of support for WPA3.

 

Here are the full details of all devices involved in my EasyMesh Setup:

  • Main Router: TP-Link Archer AX23 V1.20 (Firmware Version: 1.1.0 Build 20230725 Rel. 55602(5553))
  • Satellite Router: TP-Link Archer C64 V1 (Firmware Version: 1.13.2 Build 230824 Rel.74702n(4555))
  • Extender: TP-Link RE330 V1 (Firmware Version: 1.0.23 Build 230418 Rel.60395n)
  • Extender: TP-Link RE215 V1 (Firmware Version: 1.0.23 Build 230418 Rel.60395n)

 

All devices are running the latest available firmware versions.

 

Since satellite routers cannot be configured directly (via their web interface or the Tether app) and always follow the settings of the main router, is there a workaround to disable the WPS feature on the Archer C64 while it is also disabled on the main router, or if there isn't, can this be rectified in a new firmware update for the Archer C64?

Thanks.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Can WPS be disabled on an Archer C64 joined to an existing EasyMesh network as a satellite router?-Solution
2023-09-13 02:30:57 - last edited 2023-09-16 00:38:31

  @rosscercado 

 

Hi, thank you very much for posting on TP-Link Community.

Currently it is indeed not possible to configure the satellite router to disable the WPS, we will record it as a feature request and report it to related department for evaluation.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Can WPS be disabled on an Archer C64 joined to an existing EasyMesh network as a satellite router?-Solution
2023-09-13 02:30:57 - last edited 2023-09-16 00:38:31

  @rosscercado 

 

Hi, thank you very much for posting on TP-Link Community.

Currently it is indeed not possible to configure the satellite router to disable the WPS, we will record it as a feature request and report it to related department for evaluation.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Can WPS be disabled on an Archer C64 joined to an existing EasyMesh network as a satellite router?
2023-09-16 00:39:06

  @Sunshine Thanks for your response.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 902

Replies: 2

Related Articles