I open the ports but do not work / IMPOSIBLE ABRIR PUERTOS/

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I open the ports but do not work / IMPOSIBLE ABRIR PUERTOS/

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I open the ports but do not work / IMPOSIBLE ABRIR PUERTOS/
I open the ports but do not work / IMPOSIBLE ABRIR PUERTOS/
2013-05-26 04:03:33
Region : Argentina

Model : TD-W8968

Hardware Version : V1

Firmware Version : 1.0.0 Build 111125 Rel.28195

ISP : ARNET Telecom Argentina ADSL


I open the ports but do not work
Impossible to work with ports. Are Open and configured on the router to work with the following IP address: 192.168.1.104 But do not work are not open.
What is lacking settings please I need help?
The firewall is off,
Windows Server 2003
DMZ does not work pointing to the same IP address: 192.168.1.104 by testing not open any ports.
After changing the port settings, reboot the router, and the settings do not work.
I left the router off for more than five minutes after editing changes and does not work.

Spanish:

IMPOSIBLE ABRIR PUERTOS

Imposible trabajar con puertos. Estan Abiertos y configurados en el router para trabajar con la direccion de ip siguiente: 192.168.1.104 Pero no funcionan no estan abiertos.
¿Que configuracion me esta faltando por favor necesito ayuda?
El cortafuegos esta off,
Windows Server 2003
tampoco funciona DMZ apuntando a la misma direccion de ip : 192.168.1.104 testando los puertos no abre ninguno.
Despues de modificar las configuraciones de puertos, reinicio el router, y tampoco funcionan las configuraciones.
He dejado el router apagado por mas de 5 minutos luego de modificar los cambios y tampoco funciona.



http://imageshack.us/a/img191/8692/43060627.png
http://imageshack.us/a/img833/8044/50059782.png
http://imageshack.us/a/img716/2865/38612088.png
http://imageshack.us/a/img818/7416/34093226.png
http://imageshack.us/a/img69/7163/67411584.png
  0      
  0      
#1
Options
2 Reply
Re:I open the ports but do not work / IMPOSIBLE ABRIR PUERTOS/
2013-05-29 09:07:47
Hi.
It is better to assign a static IP address manually(192.168.1.104) on Local Area Connection of Windows Server 2003 rather than using DHCP.
You can also double check and make sure that the ports has been opened on the Windows Server 2003 .

BTW, is the modem TD-W8968? The web utility of your modem seems to be different from that of TD-W8968.
  0  
  0  
#2
Options
Re:I open the ports but do not work / IMPOSIBLE ABRIR PUERTOS/
2013-05-29 17:49:50
Hi.
Fixed issue in web sites testing calculation ports often say that the ports are closed, but are actually open and reserved for applications that utilize, also do not work if the router's firewall is activated.

thanks.
  0  
  0  
#3
Options