Solution Solved-Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
This Article Applies to:
Archer AX73 V2 with firmware version 1.0.11 Build 20230829 rel.37304
Archer AX73 V1 with firmware version 1.3.5
Phenomenon Description:
After upgrading to the firmware of AX73 that supports EasyMesh, some AX73 might reboot automatically when it is working with some models of Range Extender, such as RE650, RE605X v2, etc.
Workground:
Jul 18th, 2024 Update:
New official firmware for Archer AX73 V1&V2 has fixed the issue finally, please check for update on the web GUI or Tether App. Or you could also download it from TP-Link official website.
Archer AX73 V2 Firmware Download for Archer AX73_V2_1.1.0 Build 20240323
Archer AX73(US) Firmware Download for Archer AX73(US)_V1_1.3.6 Build 20240325
Archer AX73(EU) Firmware Download for Archer AX73(EU)_V1_1.3.6 Build 20240407
Update:
New official firmware for AX73 V2 has already been released, please check for update on the web GUI or Tether App. Or you could also download Archer AX73_V2_1.0.12 Build 20231023 manually from TP-Link official website:
Firmware Download for Archer AX73 V2
For Archer AX73 V1, please try the beta firmware below:
US version: Archer_AX73(US)_V1_1.3.5_Build_20231213
EU version: Archer_AX73(EU)_V1_1.3.5_Build_20231213
Note: Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
If there is any further issue after installing the above newest firmware, please leave comments on this thread and provide the following information:
1. Detailed problem description and your whole network topology
2. Your router’s configuration file and login password, you could save it on Advanced->System Tools->Backup&Restore->Click Backup
3. Model no., hardware and firmware version of your router and also the range extenders
4. How many client devices are usually connected and what are they.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@afcpafcp I have the same issue!
- Copy Link
- Report Inappropriate Content
@Sunshine I have the same issue, I recently updated the firmware on my Archer AX73 V1 to 20230922 rel.71211.. i don't suppose you know if there is a firmware upgrade or if the V2 firmware could work with the V1?
Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello, I would like to know when the final version of the Archer AX73 v2.20 Firmware will be released?... I have Obsessive-compulsive disorder (OCD)
I can't stand seeing the BETA version. Thanks!
- Copy Link
- Report Inappropriate Content
I have the same problem. I have updated the firmware to 20231013. Adding a comment here so I can monitor this thread.
If the problem manifests I will update here. Fingers crossed
- Copy Link
- Report Inappropriate Content
I have the Archer AX73 Router with firmware version 2.20 and the Dual Band AC1200 RE305 Wireless Repeater with firmware version 1.0.23, Build 230418, Rel. 60395n. When there is a power outage in my residence and the Dual Band AC1200 RE305 Wireless Repeater starts before the Archer AX73 Router, my router's "wifi 2.4 GHz" network does not connect all devices. Instead, all devices connect to the Dual Band AC1200 RE305 Wireless Repeater, and the internet quality becomes terrible. To resolve this, I have to restart the Archer AX73 Router with firmware version 1.0.11, Build 20231013, Rel. 54215(5553) to get everything back to normal. Is this considered normal?
- Copy Link
- Report Inappropriate Content
Hi, the official firmware for AX73 US V2 has been released and EU V2 is also in releasing process, please monitor any new firmware update via teh router web GUI or Tether App.
Regarding the 2.4G WiFi connection issue after power ourtage, it seems that the 2.4G client devices don't roam automatically to the router WiFi after the router boots up, please confirm if you enabled EasyMesh and build a mesh network by using the router and extender.
However, even though the EasyMesh network is established, the router cannot force the client devices to roam as well, it will only suggest some clients to roam but it is still the client devices that decide to roam or not.
- Copy Link
- Report Inappropriate Content
Hi, there is no known issue for AX73 V1 at this moment and since there were other users reporting it as well, we are trying to debug on AX73 V1.
It is recommanded to start a new thread and provide the following details:
1. When the issue happens, does the AX73 V1 router reboot automatically? or just client device loses connection/internet but the router always stays on?
2. If router stays on when issue happens, will all wired and wireless client devices are affected? and what are the affected devices?
3. When the issue happens, the affected client device will disconnect from the WiFi completely or still shows connected but no internet access?
4. Did you try disabling smart connect and try different WiFi channel and channel width?
5. When using the extender with the AX73 V1, is the EasyMesh enabled and a mesh network is established?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 12
Views: 9595
Replies: 77
Voters 5
