Deco M5 can send wake-on-lan packet on lan network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M5 can send wake-on-lan packet on lan network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M5 can send wake-on-lan packet on lan network
Deco M5 can send wake-on-lan packet on lan network
2023-10-26 11:47:44
Model: Deco M5  
Hardware Version:
Firmware Version:

Can the TP-Link Deco M5 router send a Wake on LAN packet to the LAN network? Wake up devices on the internal network?"

  0      
  0      
#1
Options
2 Reply
Re:Deco M5 can send wake-on-lan packet on lan network
2023-10-26 13:24:10 - last edited 2023-10-27 08:58:58

  @Jmucelli 

 

To be able to use WoL feature from an external network M5 should have IP&MAC binding implemented.

As far as this feature s not implemented there's no way to enable WoL feature as well - check this post and this post.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:Deco M5 can send wake-on-lan packet on lan network
2023-10-27 08:41:05

  @Jmucelli 

@terziyski 

If both devices are in the LAN network, IP&MAC binding is not required.

But if you want to wake up a local device through WAN, then Deco cannot forward Magic Packet since it doesn't support IP&MAC binding.

For more details, please refer to Wake on LAN

Thank you very much and best regards.

  0  
  0  
#3
Options