Official Release EasyMesh Range Extenders Start Supporting Building a EasyMesh Network via Ethernet Backhaul
This Article Applied to:
| RE315_V1 | 1.0.30 Build 230919 or later |
| RE700X(US)_V2 | 1.2.4 Build 20250304 |
| RE705X(US)_V2 | 1.2.0 Build 20241210 |
| RE705X(TW,CA)_V2 | 1.2.6 Build 20250428 |
| RE705X(KR)_V2 | 1.2.6 Build 20250605 |
| RE600X(UK,JP,AS)_V3 | 1.2.4 Build 20250304 |
| RE605X(UK,JP,AS)_V3 | 1.2.4 Build 20250304 |
| RE900XD_V1 | 1.0.10 Build 20240411 |
| RE6000XD(DE)_V1 | 1.0.10 Build 20240411 |
| RE715X_V2 | Supported on the factory firmware. |
| RE615X(US)_V2 | |
| RE600X(US/CA) _V4 | |
| RE605X(US/CA) _V4 | |
| RE655BE_V1 | |
| RE235BE_V1 | |
| RE220BE_V1 | |
| RE405BE(EU/US)_V1 |
What is EasyMesh with Ethernet Backhaul and Why we need it?
EasyMesh with Ethernet Backhaul refers to the Main router and the satellite device are connected via an Ethernet cable to establish an EasyMesh network. Ethernet Backhaul offers a more reliable and faster option compared to EasyMesh with Wi-Fi, ensuring a robust and efficient EasyMesh network setup.
How to create EasyMesh with Ethernet Backahul?
Pre-configuration Notice:
1.Ethernet Backhaul is supported only when both your main router and satellite extender support EasyMesh with Ethernet Backhaul.
>>Router Support List of EasyMesh with Ethernet Backhaul
2.The extender needs to be under wireles range extender mode, not Access Point.
3.Once the Ethernet backhaul is successfully established, the wireless backhaul will be automatically disconnected. Conversely, if the Ethernet backhaul connection gets interrupted, the devices will automatically reestablish the mesh network using the wireless backhaul.
Scenario 1: Change wireless backhaul to Ethernet backhaul
Scenario 2: Add a new satellite Range Extender to EasyMesh
EasyMesh with Ethernet Backhaul stars with RE315_V1, which features an Ethernet Port with a speed of up to 100 m/s. This functionality will gradually be extended to other EasyMesh-supported extenders. We encourage you to share your feedback below regarding your current models of EasyMesh extenders and routers. This feedback will help us prioritize the implementation of EasyMesh on different product models.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@tchirou &@mrk2005 &@Blumberger,
We're pleased to have obtained the RE700X(EU)_V1_1.2.10(pre-release firmware) for you.
Please refer to the FAQ for manual firmware updates: How to upgrade the firmware of my range extender (new logo)
If you have any feedback, please feel free to leave a reply here.
There is no clear information on when the EU version of the RE705X will be updated with new firmware. If there is an update, I will notify you as soon as possible.
- Copy Link
- Report Inappropriate Content
Joseph-TP wrote
@tchirou &@mrk2005 &@Blumberger,
We're pleased to announce that the RE700X (EU) V1.0 firmware, which supports EasyMesh Ethernet Backhaul, is now available. You check if there's new firmware available on the RE700X firmware update interface?
There is no clear information on when the EU version of the RE705X will be updated with new firmware. If there is an update, I will notify you as soon as possible.
Hi @Joseph-TP
Just tested
and it says it is up to date, I will try later
Thanks a lot for the feedback !
- Copy Link
- Report Inappropriate Content
David-TP wrote
Hi, there is still a plan to support Ethernet Backhaul on the RE800BE. The engineer explained that RE800BE needs to be updated to an entirely new firmware platform to introduce this feature, which will take more time.
Thanks a lot for your time and patience.
Best regards.
@David-TP I noticed that RE800BE was suddenly and quietly removed from the list on this thread. What happened and what does that mean?
- Copy Link
- Report Inappropriate Content
Hello @banc ,
As far as I know, the RE800BE is on the planned list, but I don't know the exact release date.
Currently, the list includes models that have been confirmed to support EasyMesh Ethernet Backhaul.
- Copy Link
- Report Inappropriate Content
@Joseph-TP thanks for your quick reply. I am concerned because until recently this model was shown on the list as "planned" but now it was just taken off the list which is unfortunate and suggest the plan was dropped suddenly and quietly. Also I am concerned since this model was released a year ago in Europe and there has been not a single update since.
- Copy Link
- Report Inappropriate Content
Joseph-TP wrote
@tchirou &@mrk2005 &@Blumberger,
We're pleased to announce that the RE700X (EU) V1.0 firmware, which supports EasyMesh Ethernet Backhaul, is now available. You check if there's new firmware available on the RE700X firmware update interface?
Hi @Joseph-TP
Still nothing on my end
Do you think you could give us a link to download the firmware file ?
thanks a lot
- Copy Link
- Report Inappropriate Content
Hello @tchirou
Please confirm the region version is EU and hardware version is RE700X_V1.
Then go to Settings-->System Tools-->Firmware Upgrade. Click on 'Check for upgrade'
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Do you have any update for RE700X(EU)_V2 ?
- Copy Link
- Report Inappropriate Content
Hi@tchirou ,
It seems that some users will be given priority to use this firmware. Sorry, I don't have a firmware download link at the moment. Please be patient and wait for subsequent firmware updates.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 43221
Replies: 137
Voters 4
