Official Release EasyMesh Range Extenders Start Supporting Building a EasyMesh Network via Ethernet Backhaul
This Article Applied to:
| RE315_V1 | 1.0.30 Build 230919 or later |
| RE700X(US)_V2 | 1.2.4 Build 20250304 |
| RE705X(US)_V2 | 1.2.0 Build 20241210 |
| RE705X(TW,CA)_V2 | 1.2.6 Build 20250428 |
| RE705X(KR)_V2 | 1.2.6 Build 20250605 |
| RE600X(UK,JP,AS)_V3 | 1.2.4 Build 20250304 |
| RE605X(UK,JP,AS)_V3 | 1.2.4 Build 20250304 |
| RE900XD_V1 | 1.0.10 Build 20240411 |
| RE6000XD(DE)_V1 | 1.0.10 Build 20240411 |
| RE715X_V2 | Supported on the factory firmware. |
| RE615X(US)_V2 | |
| RE600X(US/CA) _V4 | |
| RE605X(US/CA) _V4 | |
| RE655BE_V1 | |
| RE235BE_V1 | |
| RE220BE_V1 | |
| RE405BE(EU/US)_V1 |
What is EasyMesh with Ethernet Backhaul and Why we need it?
EasyMesh with Ethernet Backhaul refers to the Main router and the satellite device are connected via an Ethernet cable to establish an EasyMesh network. Ethernet Backhaul offers a more reliable and faster option compared to EasyMesh with Wi-Fi, ensuring a robust and efficient EasyMesh network setup.
How to create EasyMesh with Ethernet Backahul?
Pre-configuration Notice:
1.Ethernet Backhaul is supported only when both your main router and satellite extender support EasyMesh with Ethernet Backhaul.
>>Router Support List of EasyMesh with Ethernet Backhaul
2.The extender needs to be under wireles range extender mode, not Access Point.
3.Once the Ethernet backhaul is successfully established, the wireless backhaul will be automatically disconnected. Conversely, if the Ethernet backhaul connection gets interrupted, the devices will automatically reestablish the mesh network using the wireless backhaul.
Scenario 1: Change wireless backhaul to Ethernet backhaul
Scenario 2: Add a new satellite Range Extender to EasyMesh
EasyMesh with Ethernet Backhaul stars with RE315_V1, which features an Ethernet Port with a speed of up to 100 m/s. This functionality will gradually be extended to other EasyMesh-supported extenders. We encourage you to share your feedback below regarding your current models of EasyMesh extenders and routers. This feedback will help us prioritize the implementation of EasyMesh on different product models.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Joseph-TP wrote
Hi@tchirou ,
It seems that some users will be given priority to use this firmware. Sorry, I don't have a firmware download link at the moment. Please be patient and wait for subsequent firmware updates.
Hi @Joseph-TP
Do you mean something like a staged roll out which takes a few days to reach everyone or a closed testing and it could take weeks/months for the general public to get it ?
Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Last year, I also bought the AX1800 + RE605X V2 kit with the intention of extending my mesh Wi-Fi via Ethernet cable, and I was disappointed. Especially since I paid more for the RE605X extender than for the router.
Is there a newer firmware available, or are you planning to update the firmware using Ethernet backhaul in the RE605X V2?
- Copy Link
- Report Inappropriate Content
Hello, I have a TP-link Archer BE800 as a router and 3 x TP-links RE800BE as extenders. As a wired access point, this does cause some issues. I am also curious about the status of the backhaul connection. Is there any light at the end of the tunnel?I hear that there are developments happening, so please keep me informed.
- Copy Link
- Report Inappropriate Content
Hello!
I tried to install re700x eu v1 1.2.10 on my re 705x v1 (eu) and it installed without any problems!!!!!!! Now I have guest network, eco mode, ofdma+mimo switch! I haven't tested the other features yet! I'm very happy that these features were included, thanks to the developers!- Copy Link
- Report Inappropriate Content
Boribali wrote
Hello! I tried to install re700x eu v1 1.2.10 on my re 705x v1 (eu) and it installed without any problems!!!!!!! Now I have guest network, eco mode, ofdma+mimo switch! I haven't tested the other features yet! I'm very happy that these features were included, thanks to the developers!
what do you mean 1.2.1 ?
you are one of the users with access to the new firmware ?
or you find it somewhere ?
could you share it ?
thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello@John1964 ,
We have not yet received any information on the firmware release date or when it will be released. Please stay tuned for the next update.
Thanks for your kind understanding.
- Copy Link
- Report Inappropriate Content
Can I download a firmware update for another country that supports Ethernet backhaul but only supports RE605X V3 or V4 amplifiers? Has anyone tried this? Or will it definitely cause hardware damage? I don't know how much the hardware differs between the V2, V3, and V4 versions. If it's the same, it's worth trying. Please advise if you've already explored the process of flashing firmware for other device versions.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 43018
Replies: 137
Voters 4
