New Release EasyMesh Range Extenders Start Supporting Building a EasyMesh Network via Ethernet Backhaul
This Article Applied to:
| RE315_V1 |
1.0.30 Build 230919 or later |
| RE700X(US)_V2 |
1.2.4 Build 20250304 |
| RE705X(US)_V2 |
1.2.0 Build 20241210 |
| RE705X(TW,CA)_V2 |
1.2.6 Build 20250428 |
| RE705X(KR)_V2 |
1.2.6 Build 20250605 |
| RE700X(Non US)_V1 |
1.2.10 Build 20250627 |
| RE705X(Non US)_V1 |
1.2.10 Build 20250627 |
| RE780X(EU)_V1 |
1.2.7 Build 20250430 |
| RE780X(EU)_V2 |
1.2.0 Build 20250808 |
| RE3000X(DE)_V1 |
1.2.10 Build 20250627 |
| RE600X(UK,JP,AS)_V3 |
1.2.4 Build 20250304 |
| RE605X(UK,JP,AS)_V3 |
1.2.4 Build 20250304 |
| RE900XD_V1 |
1.0.10 Build 20240411 |
| RE6000XD(DE)_V1 |
1.0.10 Build 20240411 |
| RE715X_V2 |
Supported on the factory firmware |
| RE615X(US)_V2 |
|
| RE600X(US/CA) _V4 |
|
| RE605X(US/CA) _V4 |
|
| RE655BE_V1 |
|
| RE235BE_V1 |
|
| RE220BE_V1 |
|
| RE405BE(EU/US)_V1 |
EDIT: Updated on October 27th.
Moderator Note:
1. The models included in this list are based on currently available official information and may not be exhaustive.
2. This list is updated on an ad-hoc basis, and the information may sometimes be delayed. It is recommended that you refer only.
3. For the most accurate and up-to-date information, please take a look at official regional announcements and firmware update notifications.
4. We welcome your input and suggestions for discussion.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What is EasyMesh with Ethernet Backhaul and Why we need it?
EasyMesh with Ethernet Backhaul refers to the Main router and the satellite device are connected via an Ethernet cable to establish an EasyMesh network. Ethernet Backhaul offers a more reliable and faster option compared to EasyMesh with Wi-Fi, ensuring a robust and efficient EasyMesh network setup.
How to create EasyMesh with Ethernet Backahul?
Pre-configuration Notice:
1.Ethernet Backhaul is supported only when both your main router and satellite extender support EasyMesh with Ethernet Backhaul.
>>Router Support List of EasyMesh with Ethernet Backhaul
2.The extender needs to be under wireles range extender mode, not Access Point.
3.Once the Ethernet backhaul is successfully established, the wireless backhaul will be automatically disconnected. Conversely, if the Ethernet backhaul connection gets interrupted, the devices will automatically reestablish the mesh network using the wireless backhaul.
Scenario 1: Change wireless backhaul to Ethernet backhaul
Scenario 2: Add a new satellite Range Extender to EasyMesh
EasyMesh with Ethernet Backhaul stars with RE315_V1, which features an Ethernet Port with a speed of up to 100 m/s. This functionality will gradually be extended to other EasyMesh-supported extenders. We encourage you to share your feedback below regarding your current models of EasyMesh extenders and routers. This feedback will help us prioritize the implementation of EasyMesh on different product models.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Joseph-TP @David-TP , wanted to check if RE605X v.2.20 would also have ethernet backhaul support and if there is a workaround that can be done for this? Thanks!
- Copy Link
- Report Inappropriate Content
Hi, the support for RE815XE has been in status "Planned" for well over a year. Is it actually happening or is a different model going to be released that supports easymesh with ethernet backhaul and has a tri-band?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 57451
Replies: 183
Voters 5
