New Release Archer AX72 V1 New Firmware Supports Configuring HomeShield on Web UI
New Release Archer AX72 V1 New Firmware Supports Configuring HomeShield on Web UI
Hello everyone,
Exciting news! We have made an enhancement to the AX72 V1 firmware.
Previously, HomeShield configuration and management were only available through the Tether App. However, we have listened to your feedback and now introduce the option to configure and manage HomeShield directly on the router's Web UI.
In addition, the new firmware also added Tether App information on the Web UI so that users could download and install Tether App easily to manage the router in a different way.
We highly recommend giving it a try and providing us with your valuable feedback.
To experience this new feature, simply click on "Check for Updates" on your router's web GUI or within the Tether App.
This will allow you to upgrade to the latest firmware version, 1.2.2 Build 20230927.
We look forward to hearing your thoughts and making HomeShield even better for you. Thank you for your continued support!
Modifications and Bug Fixes:
1. Added management for HomeShiled functions on the Web UI
2. Optimized performance of HomeShiled
3. Enhance device security
4. Optimize the working stability of the equipment.
5. Added Tether App related information on the Web UI
HomeShield Functions on Web UI
Note: These functions are available on HomeShield page and also Advanced->HomeShield page
1. Network Check
2. Parental Control
3. QoS
Tether App Related Information on the Web UI
Related Article
What is HomeShield
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine yes, I later realised later.
- Copy Link
- Report Inappropriate Content
@Sunshine hi i have found a serious flaw on the new firmware, it seems that it disabled vlan settings after each reboot / power off of the device, please check. I have to set the vlan everytime I reboot the router.
- Copy Link
- Report Inappropriate Content
azrinaziz_kiko wrote
@Sunshine hi i have found a serious flaw on the new firmware, it seems that it disabled vlan settings after each reboot / power off of the device, please check. I have to set the vlan everytime I reboot the router.
Do you mean the settings on Advanced->Network->IPTV/VLAN will be lost completely and it shows IPTV/VLAN disabled after each reboots?
Please let us know who your ISP is and share with us a backup config file on Advanced->System->Backup&Restore page, we will test with the same config to see if the issue can be reproduced on our end.
By the way, what is the current firmware version of yoru AX72 V1? and is it US version?
- Copy Link
- Report Inappropriate Content
Do you mean the settings on Advanced->Network->IPTV/VLAN will be lost completely and it shows IPTV/VLAN disabled after each reboots?
No, it just disabled the IPTV/VLAN settings. My settings for IPTV/VLAN is intact. I just need to reenable IPTV/VLAN checkbox every reboots
My ISP is TM-UNIFI MALAYSIA
I have to revert to previous firmware to fix the problem (V1 US VERSION)
- Copy Link
- Report Inappropriate Content
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 2742
Replies: 15
Voters 3
