Ethernet speed halved when connected via VR600 v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Ethernet speed halved when connected via VR600 v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ethernet speed halved when connected via VR600 v3
Ethernet speed halved when connected via VR600 v3
2023-12-14 15:34:05 - last edited 2023-12-15 13:38:28
Model: Archer VR600  
Hardware Version: V3
Firmware Version: 1.6.0 0.9.1 v009e.0 Build 230809 Rel.6944n

I've just upgraded my fibre broadband to a 1 Gbps connection and when I connect the fibre ONT directly to my PC I'm getting very close to the full 1000 Mbps download speeds.  

 

When I connect my VR600 to the ONT in wireless router mode and connect my PC to the VR600 via ethernet my download speeds drop to < 400 Mbps despite both the PC and the VR600 reporting a 1000Mbps link speed.

 

I've tried replacing all my cables with brand new Cat 8 so the issue seems to be with the VR600's internal WAN - LAN throughput.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Ethernet speed halved when connected via VR600 v3-Solution
2023-12-15 13:38:15 - last edited 2023-12-15 13:38:28

The issue was definitely the VR600, I swapped it out today for a Linksys MX4200 and got my full download speeds straight out of the box. WiFi coverage from a single MX4200 covers pretty much the whole of my house without the need for nodes or extenders. 

 

Recommended Solution
  0  
  0  
#2
Options
5 Reply
Re:Ethernet speed halved when connected via VR600 v3-Solution
2023-12-15 13:38:15 - last edited 2023-12-15 13:38:28

The issue was definitely the VR600, I swapped it out today for a Linksys MX4200 and got my full download speeds straight out of the box. WiFi coverage from a single MX4200 covers pretty much the whole of my house without the need for nodes or extenders. 

 

Recommended Solution
  0  
  0  
#2
Options
Re:Ethernet speed halved when connected via VR600 v3
2023-12-18 17:46:37
  0  
  0  
#3
Options
Re:Ethernet speed halved when connected via VR600 v3
2023-12-18 17:46:53
FFFF1234
  0  
  0  
#4
Options
Re:Ethernet speed halved when connected via VR600 v3
2023-12-18 17:47:23

  @FFFF1234 

  1  
  1  
#5
Options
Re:Ethernet speed halved when connected via VR600 v3
2023-12-18 17:47:48
Cyf5
  0  
  0  
#6
Options