Wireless clients show up as wired
Wireless clients show up as wired
Hi,
I have an Archer AX-95 set up as an OneMesh ( 2 x RE700X) and often wireless clients would show up as "wired" in the client list. I have no actual wired devices in my network configuration
Is that a known problem? I saw a post here in the forum for a different model from July 2023 but there's no answer --.https://community.tp-link.com/en/home/forum/topic/613866
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Bmca I have the same problem - plus a bunch of others.
Currently I'm using Firmware Version: 1.0.4 Build 20230620 rel.40495(4555) and Tether 4.4.2
A technician from TP-Link has been remote checking my router twice with a beta firmware - but still problems.
There has to be a new firmware with fixes soon - and maybe some new features like app blocking and so on.
https://community.tp-link.com/en/home/forum/topic/644558
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have the same problem on an NF20Mesh. The situation does not occur if the NS02 Satellite is turned off or out of range of the device, so it seems that the firmware is incapable of recognising the connection type when connected through the NS02, indeed the NS02 itself appears as a wired device.
Another problem with this router is "Band Steering". Letting the router decide whether to connect via 2.4G or 5G is scrappy at best. I have several devices (2.4G only) that sometimes refuse to connect when band steering is enabled. It's safer to configiure dual SSiD's and you decide which to connect to.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2449
Replies: 13