Business Community > Routers > Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing
< Routers

Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing
Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing
2024-01-15 06:16:06
Tags: #WAN Setup #Load Balancing
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.3 Build 20231201 Rel.32918

I have three ISPs (cable, DSL, cell), each run into one of WAN, WAN/LAN1, WAN/LAN2.  All connections seem to be working, and to a degree traffic is flowing.  (Just rebooted, so traffic is low.)  However, I am unable to configure load balancing for WAN ports other than WAN, and unable to set online detection.  I've searched through the forums (and Google at large), and can't seem to find anything related to my problem.

 

Basic network configuration:

 

 

However, I appear to be unable to "detect" WAN/LAN1 and WAN/LAN2 as WAN ports:

 

1.  When attempting to enable bandwidth-based routing, only WAN shows up.

 

2. When setting "Online detection", only WAN shows up:

 

Just in case it's at all related to this, I do have a set of vlans set up on ports 4 and 5 (the non-WAN ports) to provide some routing options.

 

 

Thanks in advance for any pointers!

 

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing
2024-01-16 01:56:30

Hi @UpDryTwist 

Consider that either the page ages or the system glitches somehow. Have you tried to reboot it and check again? Or try in incognito mode.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing
2024-01-16 03:18:15

  @Clive_A  - unfortunately not.  I've rebooted any number of times.  Tried an incognito browser (Chrome) and also tried in Edge (which had never previously been anywhere near the site).

 

Other hints?  (Thanks!)

  0  
  0  
#3
Options
Re:Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing
2024-01-16 03:23:17

Hi @UpDryTwist 

Thanks for posting in our business forum.

Is this a brand-new device? Start with everything new?

Did you ever import any backup?

 

Have you tried to disable the extra WANs and enable them again?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options
Re:Can't configure WAN/LAN1 and WAN/LAN2 for online detection or load balancing
2024-01-16 04:22:04

  @Clive_A - new device, and never imported a backup.  I haven't removed and re-added the WANs, due to the scary messages about losing the entire configuration if I do, and I was worried about restoring a backup undoing any good that might be done by removing and re-adding.  I guess it's time to document everything and try removing/readding.  Thanks!

  1  
  1  
#5
Options

Information

Helpful: 0

Views: 331

Replies: 4

Tags

WAN Setup Load Balancing
Related Articles
WAN Configuration
391 0
ER605 WAN/LAN1 online detection not working
1894 0
Omada WAN configuration
815 0
Configure ER605, so that some devices can only use one particular WAN interface
7196 0
ROUTER ER605 network switching between WAN->WAN/LAN1 does not work.
572 0
Online Detection WAN, WAN/LAN1
1146 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.