New Arrival RE800BE-The First Wi-Fi 7 Range Extender is on the way
In early 2024, we are thrilled to introduce a new member to the TP-link WiFi 7 family. Say hello to the RE800BE, the world's very first Wi-Fi 7 tri-band wireless range extender! With its cutting-edge technology, this extender amps up throughput, slashes latency, and enhances reliability for various emerging applications. But that's not all! When you use RE800BE to create an EasyMesh network with our WiFi 7 router, you'll experience a lightning-fast Wi-Fi 7 network in every corner.
Highlighted Specifications
RE800BE |
RE815XE |
|
---|---|---|
Hardware |
|
|
Wireless Standards |
|
|
Wireless Bands |
|
|
Wireless Link Speed |
|
|
Working Modes | Range Extender/Access Point | |
Wireless Security |
|
|
Advanced Features |
|
|
Wireless Functions |
|
QA:
1. When will RE800BE be ready for purchase?
We currently don't have a specific release date for the RE800BE, but it could be expected in early 2024.
Usually, when it's ready for sale, online retailers such as Amazon will likely announce a pre-order date.
2. Does EasyMesh on the RE800BE support 6Ghz?
Yes. But please make sure the host router also supports EasyMesh on 6GHz. Currently, the following Archer BE products support EasyMesh on 6GHz.
Archer BE550_V1_1.0.5 |
Archer BE9300_V1_1.0.5 |
Archer GE800_V1_1.0.3 |
3. Does EasyMesh on the RE800BE support Ethernet Backhaul?
Not yet and It will be added via the firmware upgrade soon.
4. Does RE800BE support customizing its wireless SSID and password on 2.4/5/6GHz?
Yes, and it needs to be under standard wireless range extender mode. It will follow the wireless SSID and password under EasyMesh Mode.
If you are interested in RE800BE and want to know more about RE800BE, please feel free to comment below.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Renegade7805 there is first factory reset your router I am using be550 that is router too as satellite and has the same menu
To switch your Archer BE800 from router mode to satellite mode, you can follow these steps:
-
Access the Router’s Interface:
- Connect a device to your BE800 router.
- Open a web browser and enter tplinkwifi.net in the address bar.
- Log in with your TP-Link ID or the admin password for the router.
-
Navigate to EasyMesh Settings:
- Once logged in, click on Advanced.
- Then, select EasyMesh from the menu options.
-
Change the Mode:
- In the EasyMesh settings, look for an option that says Change Mode.
- Click on it and select Satellite Mode1.
After changing the mode, your router will restart and function as a satellite device in your mesh network. Make sure to place it in an optimal location for the best Wi-Fi coverage. If you need more detailed instructions, you can refer to the TP-Link support page for a step-by-step guide2.
- Copy Link
- Report Inappropriate Content
@AdnKhn ok, if you are sure I buy now from amazon the second be800 and will arrive Wednesday, when I open It I will try and I left to know if this procedure is correct
- Copy Link
- Report Inappropriate Content
@Renegade7805 Follow these steps once you get it and then let us know if it works:
-
Reset the Satellite Router (Optional): If the second BE800 has been previously used, it's recommended to reset it to factory defaults. To do this, press and hold the reset button on the back of the router for about 10 seconds.
-
Connect the Satellite Router: Connect the satellite BE800 to a power source. You don't need to connect it to the main router with an Ethernet cable at this stage.
-
Access the Satellite Router's Web Interface:
- Connect your computer or mobile device to the satellite router's Wi-Fi network. The default network name (SSID) and password are usually printed on a sticker on the bottom of the router.
- Open a web browser and enter the router's IP address. The default is usually
192.168.0.1
or192.168.1.1
.
-
Firmware Update (If Necessary):
- In the web interface, go to "Advanced" -> "System Tools" -> "Firmware Update."
- Click "Check for Updates" and follow the on-screen instructions if a newer version is available.
-
Configure EasyMesh:
- Go to "Advanced" -> "EasyMesh."
- Click the "EasyMesh" tab and enable it.
- Select "Satellite" as the role for this router.
- Click "Next" and follow the on-screen instructions to connect the satellite router to your main router's EasyMesh network.
- Copy Link
- Report Inappropriate Content
Hi, the second Archer BE800 could connect to the first BE800 wirelessly to establish an EasyMesh network, just as @AdnKhn said.
How to add a router to an EasyMesh network as a satellite device
Moreover, the latest firmware of Archer BE800 also supports using Ethernet Backhaul to establish an EasyMesh network.
For more configuration details, you can refer to this link:
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP good evening, today I receive the second BE800 but what poor easymesh connectivity.... it's better with RE900XD.. With my 2.5gbit in router with direct connection to fiber I receive 2,3 gbit, in easymesh with RE900XD I reach 1,3 gbit the air distance it's 4 meter, with the second BE800 only 800 - 1,1 gbit.... I'm disappointed 😞
- Copy Link
- Report Inappropriate Content
@David-TP The RE800BE is poised to become the first Wi-Fi 7 range extender, promising faster speeds, greater capacity, and lower latency for home networks. This innovation is ideal for enhancing connectivity in smart homes, where seamless internet is crucial for devices like those used in Ted Home Care.
- Copy Link
- Report Inappropriate Content
@Renegade7805 i try to setup better the connection between the 2's BE800 and now work well, in a distance of about 8 meters I reach in easy mesh 2 - 2,3 mbit/s. But I must remember to save the configuration because if I have some power faulty the system change something in its configuration. For now I'm very happy for this, we will see for the next firmware update.
- Copy Link
- Report Inappropriate Content
@David-TP can tell us if there are any updates regarding the release of the re800be in the US?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 5956
Replies: 33