New NBN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

New NBN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
New NBN
New NBN
2024-02-11 23:03:55
Model: Archer VR1600v  
Hardware Version:
Firmware Version:

Hi there, I've recently had NBN installed to the house and trying to configure my modem with my internet providers settings to get my 250/25 speed. Currently getting 40/8 :(

 

They gave me instructions to set up from the Quick set up page, however, my modem has already been set up from the previous tenants and when I reset the modem it doesn't go back to default settings to get me to the Quick set up screen. I've tried through the following address http://192.168.1.1 with username and p/w - admin

 

Has anybody else had this issue when upgrading their NBN?

 

Thank you

  0      
  0      
#1
Options
1 Reply
Re:New NBN
2024-02-12 14:56:18

  @JPC17 

 

You're probably have to use this guide to configure your modem for NBN.

Your modem probably has a customized FW if it has been provided by the ISP.

If that's the case it's quite possible that the default username/password are not admin/admin.

In this case you'll need to contact the ISP and ask for the default modem credentials.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options