How to activate one mesh wifi from MR550 and RE330

How to activate one mesh wifi from MR550 and RE330

How to activate one mesh wifi from MR550 and RE330
How to activate one mesh wifi from MR550 and RE330
2024-02-25 13:28:34 - last edited 2024-02-27 08:36:53
Model: Archer MR550   RE330  
Hardware Version: V1
Firmware Version: 1.5.0 0.9.1 v0001.0 Build 230625 Rel.65051n

I connected the RE330 extender to the Archer MR550 router as a wired access point.
Archer MR550 has its own wifi and RE330 extender has its own wifi with different name.
Both access the internet but currently a client must disconnect from one wifi and connect to the other.

 

I can't figure out how to activate the one mesh network?

 

can you give me directions? Thank you very much.

Ugo

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to activate one mesh wifi from MR550 and RE330-Solution
2024-02-26 07:15:40 - last edited 2024-02-27 08:36:53

  @UgoMontefiori 

 

To be able to build OneMesh between those two devices you have to set the RE330 in RE mode (wireless backhaul).

Here's a video guide on how to do this.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:How to activate one mesh wifi from MR550 and RE330-Solution
2024-02-26 07:15:40 - last edited 2024-02-27 08:36:53

  @UgoMontefiori 

 

To be able to build OneMesh between those two devices you have to set the RE330 in RE mode (wireless backhaul).

Here's a video guide on how to do this.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:How to activate one mesh wifi from MR550 and RE330
2024-02-28 10:48:53

  @terziyski Thank you very much, I will try as you indicated.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 188

Replies: 2

Related Articles