Home Network Community > Deco > Deco devices showing as offline in app but still working
< Deco

Deco devices showing as offline in app but still working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco devices showing as offline in app but still working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco devices showing as offline in app but still working
Deco devices showing as offline in app but still working
2024-07-17 13:46:52
Model: Deco X20  
Hardware Version: V2
Firmware Version: 1.2.4 build 20231206 rel. 32618

I have 3 X20 devices that have been working brilliantly for 2 years. However, whilst the root device is working the the devices connected via WiFi and via fixed ethernet are showing as offline This has just started happen. . Rebooting hasnt fixed this issue.

 

Devices that are connected to the offline devices still have access to the Internet and the devices are showing in the devices list for the root device even though they are connected via the offline X20s

 

The X20 device that is working is connected to a Vodafone rooter. The Ip address on this device is 192.168.68.1 however for some reason the ip address on the other devices is outside the set range ie 192.168.71.248, 192.168..71.249 and ping doesn't work.. 

 

I see that many people have seen this problem before but am I'm yet to see a solution.

 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Deco devices showing as offline in app but still working
2024-07-18 03:44:34

  @Maverick66 

Hi, welcome to the community.

I think the IP range issue is due to the current subnet 255.255.252.0, which you could find under Deco APP>More>Advanced>LAN IP.

192.168.68.xxx-192.168.71.xxx are still under the same IP range. Usually the 71. xxx will be assigned to satellite Mesh units first to avoid IP conflicts.

 

As for the offline status of the satellite Deco X20s, did you update the Deco APP recently? or was there any network adjustment, like a firmware upgrade?

Could you please refer to this link to help me submit the Deco APP log:

How to submit Deco APP log

 

Thank you very much and best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.2.10 New Firmware with Enhanced Stability & Interference Resistance ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco devices showing as offline in app but still working
2024-07-18 10:49:24

  @David-TP 

 

I've just submitted the log as requested. You are right about the IP address range, so that is ok. Also no network config changes in that I haven't applied any firmware updates recently. The only network change was about 8 weeks ago when I changed broadband suppliers, but I haven't had any issues until now. 

  1  
  1  
#3
Options
Re:Deco devices showing as offline in app but still working
2024-07-19 03:02:57

  @Maverick66 

Hi, Thank you very much for the App logs.

They have been forwarded to the senior engineer for further analysis. 

Please check the email for more suggestions.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.2.10 New Firmware with Enhanced Stability & Interference Resistance ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 608

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.