Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Help with Aginet and mesh system - NEW ROUTER/INTERNET PROVIDER

< Deco

Help with Aginet and mesh system - NEW ROUTER/INTERNET PROVIDER

JakeA

2024-07-23 06:32:08 - last edited 2024-10-25 09:37:55

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-07-23

Help with Aginet and mesh system - NEW ROUTER/INTERNET PROVIDER

2024-07-23 06:32:08 - last edited 2024-10-25 09:37:55

Model: HX220 EX230v

Hardware Version:

Firmware Version:

Good morning

Previously was using a EX230V Router supplied by my broadband provider and had to buy 3x HX220 mesh wifi extenders to reach the whole house (4 bed house 2 story).

We have changed internet providers and they have supplied me a ZYXEL EX3301-T0 router. My internet provider said I should connect one of my HX220 to the SSD box and set it up that way but there isn't any way of getting the new router on the Aginet app is there? I cant figure it out.

Once I disconnect the HX220 from the SSD box I lose internet. The HX220's I have dotted around the house so it cant be connected to the SSD all the time.

Im also not very knowledgeable with this kind of thing so that doesn't help so I appreciate any help you can give me please.

Thank you in advance

1 Accepted Solution

David-TP

2024-07-24 03:21:59 - last edited 2024-07-30 01:25:44

Posts: 12841

Helpful: 1807

Solutions: 1298

Stories: 9

Registered: 2020-04-14

Re:Help with Aginet and mesh system - NEW ROUTER/INTERNET PROVIDER-Solution

2024-07-24 03:21:59 - last edited 2024-07-30 01:25:44

@JakeA

Hi, welcome to the community.

The Aginet APP is for TP-Link devices only and I don't think we could manage ZYXEL EX3301-T0 over the Aginet APP.

How about the original EX230V? Do you have to return to the broadband provider?

Even though both the EX3301-T0 and HX220 have been announced as EasyMesh Compatible, there are currently no configuration manuals available to link different bands together. Would there be a WPS button on the EX3301-T0?

The most recommended connection is to connect one of the HX220s via an Ethernet cable to EX3301-T0 and let 3*HX220s create an EasyMesh network on their own without EX3301-T0.

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Recommended Solution

1 Reply

David-TP

2024-07-24 03:21:59 - last edited 2024-07-30 01:25:44

Posts: 12841

Helpful: 1807

Solutions: 1298

Stories: 9

Registered: 2020-04-14

Re:Help with Aginet and mesh system - NEW ROUTER/INTERNET PROVIDER-Solution

2024-07-24 03:21:59 - last edited 2024-07-30 01:25:44

@JakeA

Hi, welcome to the community.

The Aginet APP is for TP-Link devices only and I don't think we could manage ZYXEL EX3301-T0 over the Aginet APP.

How about the original EX230V? Do you have to return to the broadband provider?

The most recommended connection is to connect one of the HX220s via an Ethernet cable to EX3301-T0 and let 3*HX220s create an EasyMesh network on their own without EX3301-T0.

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Help with Aginet and mesh system - NEW ROUTER/INTERNET PROVIDER

Help with Aginet and mesh system - NEW ROUTER/INTERNET PROVIDER

Information

Voters 0

Tags