Problem on ER605 with VLAN and network 10.x.x.x/24

Problem on ER605 with VLAN and network 10.x.x.x/24

Problem on ER605 with VLAN and network 10.x.x.x/24
Problem on ER605 with VLAN and network 10.x.x.x/24
2024-08-03 14:49:41
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.5

Friends of the forum, I'm sharing this problem so that it reaches TPLINK and has a possible firmware correction.

 

When we buy the ER605 it comes with the default network 192.168.0.1/24. Depending on the scenario, sometimes we have to change this default IP. I made a network with 4 VLANS, Omada and EAPS225. I changed the default IP to 10.1.1.1/24 and made more VLANS 172.16.0.1/24, 192.168.1.1/24 and 192.168.4.1/24.

 

After that, the EAPs225 were experiencing packet loss to the point where the internet did not work (more than 50%).

 

I made all kinds of configurations via omada, including infrastructure testing, but everything was OK.

 

I even thought that the problem was in the EAP225, but there were 8 EAPS, so, based on my trust in TPLINK, I ruled out this possibility.

 

Coincidentally I had a problem at home due to changing the default IP to 10.x.x.x/24. So, I reset all the network settings and made 4 VLANS, keeping the router's default IP (192.168.0.1/24) to my surprise or not, the Wi-Fi started working normally again, zero packet loss.

 

I came to the conclusion that when changing the default IP of the ER605 to range 10.1.1.1/24 it simply goes crazy with the VLANS linked to the Access Points (EAP225). I want to record this problem here and hope for a future solution from TP-LINK.

  0      
  0      
#1
Options
5 Reply
Re:Problem on ER605 with VLAN and network 10.x.x.x/24
2024-08-04 10:07:27

  @Bug_do_Ti 

 

it's good you got it working but what you say doesn't make sense, I've never used default ip on any of the networks I manage, reason #1 is that if I do, I immediately rule out vpn between the sites, so for the last 35 years that I have been dealing with networks, I make sure that everyone gets unique networks on the lan, when it comes to your problem, I have several networks with ER605 and none of them have standard ip, in these networks there is also EAP225 as with you. all work perfectly. so that it started to work for you when you used the standard IP on the LAN is probably more random than a bug. but anyway good that everything works for you.

 

 

  0  
  0  
#2
Options
Re:Problem on ER605 with VLAN and network 10.x.x.x/24
2024-08-04 12:09:58 - last edited 2024-08-04 12:10:43

  @MR.S  It's simple to test, change a default IP to 10.1.1.1/24 and create 3 more VLANS with the EAPs225. After that, do the tests.

 

I know that theoretically there is no problem, but I have already identified this error twice. So, I no longer change the default IP to the 10.1.1.1/24 range. But I appreciate your comment.

  0  
  0  
#3
Options
Re:Problem on ER605 with VLAN and network 10.x.x.x/24
2024-08-04 12:18:44

  @Bug_do_Ti 

 

I don't have the opportunity to test this, but you may be right, I have never tested 10.1.1.1/24, so you may have hit on an ip range that is problematic. it will be interesting to hear what TP-Link has to say on the matter. I'm following this thread :-)

 

 

  0  
  0  
#4
Options
Re:Problem on ER605 with VLAN and network 10.x.x.x/24
2024-08-05 01:03:34

Hi @Bug_do_Ti

Thanks for posting in our business forum.

I have used A and B subnets for the ER605 or any Omada routers. Default VLAN 1, I have tested it.

I commonly use 10.0.0.0 for A. Use 172.16.0.0 for B if I change the default VLAN as they start the range.

On a scale of 0 to 10, will you rate this 10 which is you are absolutely certain that this is not an issue with your network setup?

 

Do you use a Controller? Version? I have no issue with any version before V5.14.20.9.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#5
Options
Re:Problem on ER605 with VLAN and network 10.x.x.x/24
2024-09-17 14:39:17

  @Clive_A 

 

Thank you very much for your reply, I'm going to close this topic and create another one, it really has nothing to do with the 10.x.x.x network it's another problem that's keeping me up at night

 

Problem not discovered yet

  0  
  0  
#6
Options