Home Network Community > Deco > WPA3 settings on BE85
< Deco

WPA3 settings on BE85

WPA3 settings on BE85

WPA3 settings on BE85
WPA3 settings on BE85
2024-08-14 07:20:25 - last edited 2024-08-15 09:53:33
Model: Deco BE85  
Hardware Version:
Firmware Version: 1.0.18 build 20240409 Rel. 41111

Hi,

 

sorry for my English (I'm French).

 

Here is my network setup :

 

  • 1 beco BE85 behind my fiber modem (as router) 
  • 1 dac ( SFP+ to SFP+) between both
  • Connexion ok : Dow: 7 Gb over 8 and up 0,7 Gb over 0,8
  • BE85 as Access Point

 

2 SSIDs:

  • WifiOne : 2,4/5 Ghz
  • WifiTwo: 6 Ghz

 

My phone: Poco F6 Pro

 

When I try to connect to WifiOne: no problem: working fine I can see the Wifi 6 or 7 logo . Download and upload rates are ok: 1,2 Gb / sec

 

But I can't reach the 6Ghz SSID (WifiTwo). I've tried to remove the password and I can get connected . Download rate: 3,7 Gb / sec so I've reached the 6Ghz network.

 

When I put back my password : not working

 

My fireTV get connected with  the password. So I think there is a problem between my phone and the password or the security mode.

 

When I reach the "advanced" parameters in 2,4/5Ghz SSID , I can see some parameters such as : security (set to WPA2) / Frequency / etc (casual info...)

When I reach the 'advanced" parameters in the 6 Ghz SSID,  I've only two options : Security / Hide the SSID. And what's it really stange: for the level of scurity I've got only two options :

  • WP3
  • DEVOIR => I'm sorry but what does it mean ? Devoir in French means "homework" (maybe a wrong translation in the DECO APP)

 

Last thing: When I turn on the MLO network It allows also WP3 and "DEVOIR" in security, I can reach the network with my phone but I think it doesn't take the 6Ghz because I'm connected with a bandwitch of 2888 Mbps.

 

Could you please advice or provide any help to get my phone connected to 6Ghz SSID and give me some info on "DEVOIR" security option ?

 

PS: sorry I've reach two tickets with the DECO app but we don't get any confirmation in the app or by mail if the ticket has been successfully created

  1      
 
  1      
 
#1
Options
9 Reply
Re:WPA3 settings on BE85
2024-08-15 08:05:09

  @Slaybz 

Hi, Welcome to the community.

I think the "DEVOIR" here refers to "OWE"(Opportunistic Wireless Encryption), which is a Wi-Fi Enhanced Open authentication mode, as a part of WPA3, which allows for network access without the password. 

You can refer to this link to find more details about "OWE".

 

For the reported issue, would there be any error message when Poco F6 Pro fails to connect to the WiFiTwo-6 Ghz when the security mode is set to WPA3?

Would there be any special characters in the password, such as space, "€"?

 

Thank you very much and best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:WPA3 settings on BE85
2024-08-15 08:50:28 - last edited 2024-08-15 09:24:36

  @David-TP 

 

Many thanks for your answer David.

 

My password is made with only lettres and figures.

 

I've juste tried to change it with a différent code from thé 2.4/5ghz . still not connecting.

 

I've tried another Time without wpa3 so with DEVOIR (.i.e no password) working fine....

 

see my 3 screenshots: 2,4/5gz , 6ghz and the error when trying to reach the 6ghz . no other error message

 

Caption

 

 

Caption

 

 

 

 

 

 

Bonus questions:

 

as connected to 6ghz  network the rate is 5764 Mbps. I was really closed from thé routeur (10cm) , isn't normal ? I was more expecting 11gbs... it looks liké more I'm still on 5ghz isn't ?

 

and why i can't set the frequencies in the 6ghz settings ?

 

  1  
  1  
#3
Options
Re:WPA3 settings on BE85
2024-08-15 09:24:14

@Slaybz 5764 Mbps indicates the highest speed your phone will achieve

Just a M4 (2-pack) user who regrets buying it
  1  
  1  
#4
Options
Re:WPA3 settings on BE85
2024-08-15 09:27:30
Are you sure ? it isn't the highest speed of the network ? (i'm Lost with this issue 😂)
  0  
  0  
#5
Options
Re:WPA3 settings on BE85
2024-08-15 09:35:24 - last edited 2024-08-15 09:35:40

 

  @Slaybz 

Hi, Thank you very much for the further details.

Are you able to constantly reproduce this issue on the Poco F6 over 6GHz SSID？

By the way, have you tried to set "WPA 3 only" under 2.4GHz/5GHz WiFi to see whether Poco F6 had a similar issue?

 

I might need to escalate your case to the senior engineer later. Please also check whether you have received my email.

By the way,  As the Fire TV also supports 6GHz wifi, is it Amazon Fibre TV 4k Max?

Wait for your reply and best regards.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:WPA3 settings on BE85
2024-08-15 09:50:10

  @David-TP 

 

on the 2.4/5ghz it's ok with wpa3 mode. but speedtest close the routeur is 300 mbs when i get 1.2gb with wpa2/wpa3

 

i've hot also a wifi7 logo with a "+" on the logo , i don't know What it IS....

 

 

 

my fire TV IS the firetv 4k max 2nd Gen

 

 

network analyse through firetv:

 

 

 

 

  1  
  1  
#7
Options
Re:WPA3 settings on BE85
2024-08-15 09:50:25 - last edited 2024-08-15 09:53:33

  @Slaybz 

Hi, Deco BE85 is 4×4 MU-MIMO while PoCo F6 is 2x2 MIMO. So I think its maximum link rate over 6Ghz would be 5764mbps.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#8
Options
Re:WPA3 settings on BE85
2024-08-15 09:54:09 - last edited 2024-08-15 11:39:27

question bonus solved 😉😎

 

What does this mean:

 

8x8 sounding for mu-mimo:

 

And yes I've recieved your mail (but same content as your message in the forum ) so should I have to do something for thé senior engineering team ? You Can connect to my déco if needed

  1  
  1  
#9
Options
Re:WPA3 settings on BE85
2024-08-16 01:58:33

  @Slaybz 

Hi, I also found this when I checked the wireless specification of Poco F6. The "8x8 sounding for Mu-MIMO" seems to be a new wireless technology of XiaoMi.

I found some comments mentioning that "8x8 sounding for Mu-MIMO" serves as a detection mechanism. This implies that the mobile phone can detect up to 8 sets of MU-MIMO antennas (spatial streams) simultaneously. Thus, the two groups with the best signals are selected for connection. 

However,  there is no official statement for this. It would be better if you could directly ask for further explanation from Xiaomi Poco support.

 

Thank you very much and best regards.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#10
Options

Information

Helpful: 1

Views: 345

Replies: 9

Related Articles
Deco BE85 wifi settings question (MLO)
230 0
BE85 download issues
959 1
BE85 randomly restarts
1297 2
Deco BE85 keeps restarting on its own!
1684 3
Deco BE85 randomly restarts
633 1
Deco BE85 VPN client not working
460 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.