Tapo S200B double tap feature does not stick
Tapo S200B double tap feature does not stick
After enabling the double tap feature of my Tapo S200B Buttons, the feature then says "not enabled" if checking in my Smart Automations later that require double tap (next day for example).
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Update
The main problem discussed in this post "Automation that included S200B Double-tap trigger shows invalid action error" is an information display issue in the App but it does not affect automation operation. As for other cases where automation may be delayed or not working, those are separate issues unrelated to this topic.
Check here for troubleshooting suggestions about What can I do if the Smart Action/Automation doesn’t take effect as expected?
- Copy Link
- Report Inappropriate Content
@BPCS Same problem. Double click randomly deactivated and again activated.
- Copy Link
- Report Inappropriate Content
Yes... if I do a refresh of the Tapo App, then after about 5 seconds or more, the double tap (usually) becomes active again. However, if I try to do a new smart automation requiring the double tap feature, I need to deactivate and reactivate the double tap feature to create the smart automation.
I hope Tapo/ TP Link reads these forums and looks into this.
- Copy Link
- Report Inappropriate Content
Which Tapo hub are you using? Please check the firmware version on both Tapo S200B and the hub.
When the status of the double tap feature appears abnormal, is the double tap option missing when creating a new automation? Or is the option available but an error occurs during saving?
What happen if you edit an existing automation that already includes the double tap?
- Copy Link
- Report Inappropriate Content
Tapo S200B HW 1.0 Firmware 1.12.0 Build 231121
Hub H100 HW 1.0 Firmware 1.5.16 Build 240627
- Copy Link
- Report Inappropriate Content
@Wayne-TP It looks like the doubletap function in the button is sleeping. After waking up the button (singletap, turning, starting the Tapo application), doubletap also starts working, but after a while it goes back to sleep.
- Copy Link
- Report Inappropriate Content
My versions are the same as @FRENKY33
I can add that if I go and look at my Automations in the Tapo App, there is a comment in orange text "some triggers are invalid" where the S200B Buttons are involved with double tap used. If I refresh the app and wait a bit, that orange comment disappears.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Wayne-TP also have the same HW/FW versions as noted above, and have also started having the same problem with the double-tap function.
To add to FRENKY33's comment about waking up the button, it feels like this is also true here, except that it's not the (nearly) instantaneous wakeup that might be implied by their comment - between single-tapping the button to turn on my lights, and then being able to double-tap it to invoke the smart action that sets their brightness/colour temperature based on the time of day, it can be up to 5 minutes or so before the app shows the double-tap actions without errors, and before they then have the desired effect on the lighting.
Note also that the activity log for the button does show all of the double-tap events are logged at the appropriate times, so it's not simply a case that the double-taps are being ignored entirely during this unresponsive period.
- Copy Link
- Report Inappropriate Content
Yes... it's a very "laggy" operation for the double tap feature.
- Copy Link
- Report Inappropriate Content
According to the latest updates, this issue is a display error within the app. The automation is actually working as intended. Please confirm whether this is the case for you?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1131
Replies: 14
Voters 0
No one has voted for it yet.