Home Network Community > SOHO Switches > TP-Link LS1008G Switch won't go past 100Mpbs
< SOHO Switches

TP-Link LS1008G Switch won't go past 100Mpbs

TP-Link LS1008G Switch won't go past 100Mpbs

TP-Link LS1008G Switch won't go past 100Mpbs
TP-Link LS1008G Switch won't go past 100Mpbs
19 hours ago
Tags: #speed issue
Model: LS1008G  
Hardware Version: V3
Firmware Version: N/A

Hi, 

 

Got this LS10008G switch 10/100/1000Mpbs for quite some while, but the speed won't go over 100Mpbs.

 

The configuration is the following: Orange router (1800Mpbs plan) > (30m CAT6) > LS1008G > PC (motherboard 10/100/1000Mpbs), however, the speed will peak at 100Mpbs.

 

Is there anything that has to be done in particular for this switch to get closer to that 1000Mpbs?

 

Thank you! 

  0      
 
  0      
 
#1
Options
1 Reply
Re:TP-Link LS1008G Switch won't go past 100Mpbs
7 hours ago

  @bigbadwolffe 

 

Usually this is cause by the bad cabling. CAT 5e would suffice too.

You can check that by using a shorter factory made quality cable between the orange router and the LS1008G just for the test.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 19

Replies: 1

Tags

speed issue
Related Articles
LS1008G dropping significant speed
1036 0
Issues with LS1005G and LS1008G switches
830 0
AV1000 won't go past 300mb
592 0
AV600 / TL-PA4010P does not go past 100 mpbs
826 1
Ax10 router network port does not work with Ls1008G switch
169 0
Débit faible TP-Link Switch Ethernet (LS105G)
330 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.