Adguard on Deco x50 POE
Is it possible to get adguard running on an x50 POE, when in router mode?
When I try to change the primary DNS I get the error:
"This IP conflicts with LAN IP subnet. To use this server set it at DCHP server"
When I enter the IP address if the raspberry pi running home assistant and adguard into the dchp primary DNS I get no internet.
Thers a lot of info out there about missing the feature to specify a DNS and but I can't find anything specific on an x50 POE in router mode.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
"When I enter the IP address of the raspberry pi running home assistant and Adguard into the DCHP primary DNS I get no internet. "
- Is it connected to the Guest Network when you have no internet connection?
- How about the Raspberry Pi? Is it connected to the Deco via an Ethernet cable or the main Wi-Fi network?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Hi
No I don't use the guest network so everything on the main network.
The raspberry pi is connected via ethernet to s switch, connected to main deco.
Maybe I'm missing a step, all I do is change the DCHP to the pi IP address. Is there something else I should do?
- Copy Link
- Report Inappropriate Content
I got sorted, even though I had the IP Address as static for the Pi through my deco system, I didn't give it a static address in Home Assitant so it wasn't working.
(Just in case it helps somebody else).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 217
Replies: 3
Voters 0
No one has voted for it yet.