Not connecting all smart switch to wi-fi
Hi everyone,
I wanted all the switches at the house to match but do not want to connect them all to wi-fi. Is there a way to stop the switches from blinking orange and green and stay just green without being connected to wi-fi?
Thanks in advance
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Which switch are you referring to?
As I understand it, the smart switch requires a Wi-Fi connection for configuration, so the LED indicator is set to be on by default for guidance. Typically, once the device is configured, you can check the settings for an option to turn off the LED indicator.
If you want to use the smart switch as a dumb switch, you can do so by not providing power to the switch, either by not connecting the neutral wire or not installing batteries. In this case, the LED indicator will remain off (but you won’t be able to configure it either).
- Copy Link
- Report Inappropriate Content
Which switch are you referring to?
As I understand it, the smart switch requires a Wi-Fi connection for configuration, so the LED indicator is set to be on by default for guidance. Typically, once the device is configured, you can check the settings for an option to turn off the LED indicator.
If you want to use the smart switch as a dumb switch, you can do so by not providing power to the switch, either by not connecting the neutral wire or not installing batteries. In this case, the LED indicator will remain off (but you won’t be able to configure it either).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 107
Replies: 1
Voters 0
No one has voted for it yet.