Hi @AAADiver 

Thanks for posting in our business forum.

I uploaded one from the exported file or the template, both can be uploaded correctly on a Software Controller V5.14.

What file format did you use?

Have you examined if you have put the correct parameters?

Note that the network name and the IP you've input.

Hi @AAADiver 

Thanks for posting in our business forum.

AAADiver wrote

Hi  @Clive_A -

Thanks for your reply. Responses to your questions are below. 

 

Q: What file format did you use?

A: Standard csv format exported from excel.

 

Q: Have you examined if you have put the correct parameters?

A: I included an example of what I uploaded in my original question, 
    Default,00:06:78:xx:xx:xx,192.168.254.169, Enable,,Heos

    Honestly not sure what "Export to IP-MAC Binding" is so left that field blank. Maybe that's my issue? It's saying invalid number of delimiters so clearly missing something or my format is wrong. Can you share a single record from one of your successful uploads?  

 

Q: Note that the network name and the IP you've input.
A:  Not sure what you mean here. I kept my Network Name as "Default" and that's what I specified in the upload and the IP address is valid and in my IP range. 

 

Thansk again,

Allen

So that is to say the csv is the template from Omada. And you replaced the parameters. Do I understand you correctly?

Can you paste a screenshot directly from your csv file? You can mosaic your MAC address.

The Network Name and the IP should exist on the router as the VLAN int has been created and the IP is not used.

Hi @AAADiver

AAADiver wrote

HI   @Clive_A 

 

Still can't get this to work. This is a screenshot of my file and the associated error message.

 

 

 

 

Not sure what you mean by "...the IP should exist on the router as the VLAN int has been created and the IP is not used."

 

You'd think this would be a lot easier. Unfortunately I have quite a few reservaltions I'd like reserved if I can ever get this to work.

 

Thanks,

Allen

You exported the file from the Controller and edited the file in Excel. Then imported it and it reported this error message, is that correct?

If you export the existing DHCP reservation, and manually delete one of the entries in the Controller. Then edit the file and only keep the deleted entry in the .csv and try importing it. Will it behave the same with the same error?

I have tried multiple ways but I don't reproduce this.

Firmware version of ER605 and Controller version.