Business Community > SOHO Switches > can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches
< SOHO Switches

can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches

can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches

can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches
can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches
2 weeks ago - last edited 2 weeks ago
Tags: #Configuration #Network Connectivity
Model: TL-SG1024D   TL-SG1048  
Hardware Version:
Firmware Version:

looking to upgrade our office switches with some TP-Link models.  as i understand, all my models below support MDI/MDIx which should mean i am able to connect a straight thru ethernet (not crossover) from port to port without the use of SFP or UpLink ports.  with that said, im trying to see which layout below gives me the best practice, best performance, some redundancy.  also would like to hear from you on similar layout experiences u currently have in place or had in place that gave u the best/worse kind of scenarios.  thanks in advance

 

LAYOUT 1

 

 


LAYOUT 2

 


LAYOUT 3

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches-Solution
2 weeks ago - last edited 2 weeks ago

Hi @CNMPC 

Thanks for posting in our business forum.

They are the same unless you have extremely high bandwidth and all ports constantly take that high throughput, 3 is the best.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches-Solution
2 weeks ago - last edited 2 weeks ago

Hi @CNMPC 

Thanks for posting in our business forum.

They are the same unless you have extremely high bandwidth and all ports constantly take that high throughput, 3 is the best.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches
a week ago

  @CNMPC 
thanks for the reply.  after some addl research, to go with LAYOUT 3 i would hav to configured addl interfaces on my FW and each of those interfaces, although trusted, would have diff networks/IPs and i dont know if i want to deal with static reservations alwyas having to be plugged back into the same FW interface.

with that said, if i go with LAYOUT 1, would the throughput on the switch model TL-SG1024D be sufficient enough for a SMB with maybe 40 computers, a few printers, and approx 20 VOIP phones?

thanks

  0  
  0  
#3
Options
Re:can i daisy chain a TL-SG1024D 24 port switch with multiple TL-SG1048 48 port switches
a week ago

Hi @CNMPC 

Thanks for posting in our business forum.

CNMPC wrote

  @CNMPC 
thanks for the reply.  after some addl research, to go with LAYOUT 3 i would hav to configured addl interfaces on my FW and each of those interfaces, although trusted, would have diff networks/IPs and i dont know if i want to deal with static reservations alwyas having to be plugged back into the same FW interface.

with that said, if i go with LAYOUT 1, would the throughput on the switch model TL-SG1024D be sufficient enough for a SMB with maybe 40 computers, a few printers, and approx 20 VOIP phones?

thanks

 

I am not able to guarantee based on the given information. I think it's fine but you'll need to know what your network is like and do the math. You can take a look at this:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 122

Replies: 3

Tags

Configuration Network Connectivity
Related Articles
 Daisy Chain IP phone and PC on a 24 port TP-Link switch with VLANs
556 0
EAP Wall Daisy Chain
982 0
 Ideal order / daisy chain of switch connections
234 0
Daisy Chain TP-Link SG1008P to SG1008MP
596 0
Why is my switch port status speed not the same on the EAPs
214 0
 Multiple CPE210s in a Daisy Chain
1017 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.