NX200: switch LAN3/WAN

NX200: switch LAN3/WAN

NX200: switch LAN3/WAN
NX200: switch LAN3/WAN
2 weeks ago - last edited 2 weeks ago
Model: Archer NX200  
Hardware Version: V1
Firmware Version: 1.4.0 3.0.0 v60a2.0

I've got an NX200 5G router. I couldn't figure out how the LAN3/WAN port would work as an LAN port. The other two LAN ports work well.

I didn't change something at the preset settings on port forwarding / DHCP / DNS / ...

 

Is there a setting somewhere to change the WAN port to be the LAN3 port?

Tried already to restart it. When I connect the same device with the same cable to the LAN1 or LAN2 port it does work.

 

Thanks

  0      
  0      
#1
Options
1 Accepted Solution
Re:NX200: switch LAN3/WAN-Solution
2 weeks ago - last edited 2 weeks ago

  @123421 

I solved it on my own with the help from an other customer anserwing my question at Amazon:

Go to settings / Advanced / Internet --> delete all entries in the table "internet settings". Then the LAN3 Port will be changed from WAN to LAN3.

 

Even TP-Link support didn't knew that - they gave me the option to get a new device...

 

 

Recommended Solution
  2  
  2  
#3
Options
3 Reply
Re:NX200: switch LAN3/WAN
2 weeks ago

  @123421

Additional information: It does recognize the cable. But the port is listed as WAN and not LAN3. So, there might be an option somewhere to switch that? Couldn’t find it yet…

  0  
  0  
#2
Options
Re:NX200: switch LAN3/WAN-Solution
2 weeks ago - last edited 2 weeks ago

  @123421 

I solved it on my own with the help from an other customer anserwing my question at Amazon:

Go to settings / Advanced / Internet --> delete all entries in the table "internet settings". Then the LAN3 Port will be changed from WAN to LAN3.

 

Even TP-Link support didn't knew that - they gave me the option to get a new device...

 

 

Recommended Solution
  2  
  2  
#3
Options
Re:NX200: switch LAN3/WAN
Monday

  @123421 I have this same problem with my new NX200 router, as I def need all those 3 LAN ports for my hubs. I went to see firmwares available, and got confused as the latest published firmware was older version..so I thought to pick up biggest in version number - a mistake! It seems that EU version 1_4_... Is not recognising 3 LAN ports, whatever you do. But when I installed latest, but older firmware version 1_3_... router started to work smoothly and all LAN ports are now in use!

  0  
  0  
#4
Options