ONZ Firmware flash
Hi there , I have deco x50 from One NZ (ex Vodafone company) problem is deco comes with ONZ costume firmware , 2.0 something, I manage to flash 1.2.2 original firmware and finally I have working VPN and other stuff what ONZ firmware don't have, but I cant flash any other like 1.4 or latest one 1.6, Im using recovery mode to flash firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, The upload bin file for firmware recovery is up to 32MB, and ever since 1.2.2, the latter versions are all over 32 MB.
If the hardware is not customized for NZVDF, the general version could be updated to 1.4./1.6 via web UI but the web UI is not available for the NZVDF version.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi, The upload bin file for firmware recovery is up to 32MB, and ever since 1.2.2, the latter versions are all over 32 MB.
If the hardware is not customized for NZVDF, the general version could be updated to 1.4./1.6 via web UI but the web UI is not available for the NZVDF version.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thank you so much for your respond, basically there is no way to patch back to original firmware over ONZ ones.
- Copy Link
- Report Inappropriate Content
It sounds like you're dealing with some compatibility issues when trying to flash newer firmware. Sometimes, using recovery mode can be tricky, especially with modified firmware versions. Have you tried using a different method, like TFTP, or checking for any wednesdayaddamscostume specific restrictions with ONZ firmware that might block updates? It might help to reset to factory settings before attempting another flash.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 197
Replies: 4
Voters 1