Hello, my name is Stefano and I'm writing from Italy.

Just in the middle of December I bought on Amazon a combo TP Link NX200 and RE605x in order to setup a 5G network in my home. Fortunately I received the pack with the V3 HW for the extender (note that on Amazon your're not able to choose the HW version of the extender).

I setup the devices upgrading the extender to the last firmware in a seameless easy mesh network. The last week, after some good trials, I decided to buy an additional RE605x extender still on Amazon, but this time I was not so lucky: I received the V2 version that is not supposed to work in a easy mesh network.

I tried, with no success, to contact the official TP Link support by the phone (no response in severy hours of the day, from 9:00 to 17:00) and via e-mail (still no answer). So at this point, before sending back everything to the vendor via Amazon, I'll try the last chance: can someone help me here with hints for downloading an updated firmware for easy mesh connection on the V2 extender OR an updated firmware for one mesh management on the NX 200 router.

Any hint/suggestion can be really appreciated.