Archer NX200 External Antenna

Archer NX200 External Antenna

Archer NX200 External Antenna
Archer NX200 External Antenna
2025-01-15 09:43:27 - last edited 2025-04-27 11:17:17
Model: Archer NX200  
Hardware Version: V2
Firmware Version:

Good morning,
a technical question: if I do not use external antennas the signal strength is indicated at 75%. If I set the use of external antennas, whether they are installed as well as if they are not connected, the signal strength remains at 75%. Is this correct?

  1      
  1      
#1
Options
4 Reply
Re:Archer NX200 External Antenna
2025-01-16 03:41:53

  @Giovanni_Parma 

 

Hi, welcome to our community.

As we know, the performance of 5G external antennas is closely tied to the current SIM operators and nearby cell towers, it is hard to say the result.

It is suggested to refer to this thread to know more:  Install 5G External Antennas on Archer and Deco 5G Routers

Thank you and best regards.

 

  0  
  0  
#2
Options
Re:Archer NX200 External Antenna
2025-01-16 10:28:01

  @Giovanni_Parma 

Good morning and thanks for the reply.


Maybe I didn't express myself clearly:


1) Internal antennas 75% signal strength

2) I select from the router web page "External Antenna"

3) With 2 external antennas connected 75% signal strength
4) I disconnect the 2 external antennas (antenna connector open) always 75% signal strength.

 

It seems to me a bug in the command of the external antenna selection button on the web page.

 

Regards

  4  
  4  
#3
Options
Re:Archer NX200 External Antenna
2025-04-28 07:25:27 - last edited 2025-04-28 07:25:55

  @Giovanni_Parma 

 

Hi, thanks for your further sharing~

We need to collect some information to understand your situation better.

1.What is the model of your external antennas?

2. After installing the external antennas, please log into the web UI of the router and share us the screenshot fo Status page. (Advanced >>Status)

If you have more details, please feel free to share here.

Thanks for your cooperation and best regards.

  0  
  0  
#4
Options
Re:Archer NX200 External Antenna
2025-05-29 19:20:31

  @Marvin_S 

Same problem.

Itried  ecplain in anorher post even triing to get  in tough via mail that there is a major fault in the f irmware that one cannot turn on the external antenna on nx200 and nx600.

The switch for external antenna in the webgiud simply do not work and have nothing to do what antenna or carrier one have.

 

It is firmware related and all versions have this fault at least on v1 devices like the one I have.

 

 

  0  
  0  
#5
Options