Archer C80 WOL stops working after few hours

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C80 WOL stops working after few hours

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C80 WOL stops working after few hours
Archer C80 WOL stops working after few hours
2025-01-21 13:48:10 - last edited 2025-01-21 15:42:02
Model: Archer C80  
Hardware Version: V2
Firmware Version: 1.13.15

Hello!

 

The issue I am trying to find solution for is with waking a PC over my Archer C80 HW: 2.20 FW:1.13.15

I have multiple other TP-Link (e.g. AC2300) and non-TP-Link routers at other locations and WOL/IP&MAC binding works perfectly.

So I configured fix IP for the computer and then turned IP&MAC binding on. WOL works for ~2 hours and then it stops working (over LAN and WAN also). I can remotely access the router interface using no-ip service and when I restart the router, WOL does work again for ~2 hours.

At this location I used to have a D-Link DIR-842 and was able to use WOL with no issue at all therefore, I think the provlem is with the Archer C80.

I tried to fix the problem by reseting the router and going through the configuration from 0 with no luck.

 

Has anyone else experienced the same issue? If so, what was the solution?

Thanks,

Andras

  0      
  0      
#1
Options
2 Reply
Re:Archer C80 WOL stops working after few hours
2025-01-22 08:57:19

Hi  @apeto86,

Please try to start the router for a few hours without sleeping, and then use the arping command to confirm whether the IP of the target device is reachable?
And post the result here.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: △Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △Tether KidShield Test Recruitment - Safeguarding Children's Online Experience If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer C80 WOL stops working after few hours
2025-01-22 09:52:20

Hello Joseph,

Thank you for your reply.

I am afraid I do not exactly understand what you mean by 'start the router for a few hours without sleeping'.

Can you please explain what I should do in a different way?

Thanks & regards,

Andras

  0  
  0  
#3
Options