Archer NX200 WAN LAN
最近購置了一台Archer NX200接上電信業者的5G SIM非固定IP制
連接原有設備Switch和AP
Aruba IOn 1930 8G 2SFP 124W 8埠PoE Switch(192.168.2.102)
Aruba Instant On 無線基地台 AP11(192.168.2.104)
請問要如何讓Archer NX200成為Gateway(192.168.2.254)和DHCP Server(192.168.2.20-199)
Hi, welcome to our community.
1. After setting up the router properly for internet access, you may log into the web UI of NX200, go to Advanced>>Network>>LAN settings, and change IP Address(under DHCP Server) into 192.168.2.254 and change IP Address Pool into 192.168.2.20-199.
The screenshot below is for your reference:
2. Turn off DHCP on other devices. Ensure that DHCP is turned off on the Aruba switch (192.168.2.102) and AP (192.168.2.104) to avoid IP assignment conflicts.
3. Reboot the Archer NX200, switch, and AP.
Thank you and best regards.
Hi, welcome to our community.
1. After setting up the router properly for internet access, you may log into the web UI of NX200, go to Advanced>>Network>>LAN settings, and change IP Address(under DHCP Server) into 192.168.2.254 and change IP Address Pool into 192.168.2.20-199.
The screenshot below is for your reference:
2. Turn off DHCP on other devices. Ensure that DHCP is turned off on the Aruba switch (192.168.2.102) and AP (192.168.2.104) to avoid IP assignment conflicts.
3. Reboot the Archer NX200, switch, and AP.
Thank you and best regards.