bartdaniels wrote

Region : Australia

Model : TD-W8960N

Hardware Version : V5

Firmware Version : 131129

ISP :

Hi,

I am trying to setup the SNMP on the TD-W8960N, but when I attempt to read the community for testing from a linux box, it times out after getting the router info as follows:
-------------------------------------------------------------------
[root@mc ~]# snmpwalk -v 1 -c public 10.0.0.1
SNMPv2-MIB::sysDescr.0 = STRING: 1.1.1 Build 131129 Rel.49672
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.16972
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (131400) 0:21:54.00
SNMPv2-MIB::sysContact.0 = STRING: Bart
SNMPv2-MIB::sysName.0 = STRING: ADSL2
SNMPv2-MIB::sysLocation.0 = STRING: Home
SNMPv2-MIB::sysServices.0 = INTEGER: 72
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (131400) 0:21:54.00
SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifNumber.0 = INTEGER: 8
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
Timeout: No Response from 10.0.0.1
-------------------------------------------------------------------

Have restarted the modem and still the same...The SNMP Agent is enabled on the modem.

Any help would be appreciated.

Thanks