Hi @AleCalixto 

Thanks for posting in our business forum.

Use the guide:

VPN Connectivity and Access Troubleshooting Guide

If that does not resolve, post every result in that troubleshooting guide in your next reply.

  @Clive_A 

1. I need guidance with IP allocation

2. Time definition I think it's ok, all equal

3. I also need help with NAT and VLAN (if needed)

4. No censure by country, I use other US VPNs

5. I'm using WireGuard

6. Did it several times

Hi @AleCalixto 

Thanks for posting in our business forum.

AleCalixto wrote

  @Clive_A 

 

1. I need guidance with IP allocation

2. Time definition I think it's ok, all equal

3. I also need help with NAT and VLAN (if needed)

4. No censure by country, I use other US VPNs

5. I'm using WireGuard

6. Did it several times

What's your WAN IP like?

Snip from the controller WAN status.

Please mosaic your sensitive information. Here is a list of information considered sensitive:

1. Public IP address on your WAN if your WAN is.

2. Real MAC address of your device.

3. Your personal information including address, domain name, and credentials.

For troubleshooting purposes, when a WAN IP is needed, please leave some values visible for identification.

  @Clive_A 

All WAN info is sensitive, but I saw that I have two different IPs, one public and other as the IPv4, also two DNS IPs and one for the provider's gateway.

LAN: I have 192.168.0.1 as the Router LAN address, connected to a Mesh Router serving the devices with 192.168.2.1 network.

I am allocating 10.10.10.1 for the VPN server, but I also tried 192.168.100.1 and many others, always updating the NAT rule accordingly.